Inward lithium-ion breathing of hierarchically porous silicon anodes
نویسندگان
چکیده
Silicon has been identified as a highly promising anode for next-generation lithium-ion batteries (LIBs). The key challenge for Si anodes is large volume change during the lithiation/delithiation cycle that results in chemomechanical degradation and subsequent rapid capacity fading. Here we report a novel fabrication method for hierarchically porous Si nanospheres (hp-SiNSs), which consist of a porous shell and a hollow core. On charge/discharge cycling, the hp-SiNSs accommodate the volume change through reversible inward Li breathing with negligible particle-level outward expansion. Our mechanics analysis revealed that such inward expansion is enabled by the much stiffer lithiated layer than the unlithiated porous layer. LIBs assembled with the hp-SiNSs exhibit high capacity, high power and long cycle life, which is superior to the current commercial Si-based anode materials. The low-cost synthesis approach provides a new avenue for the rational design of hierarchically porous structures with unique materials properties.
منابع مشابه
Carbon scaffold structured silicon anodes for lithium-ion batteries
A unique methodology of fabricating Si anodes for lithium-ion batteries with porous carbon scaffold structure is reported. Such carbon scaffold Si anodes are fabricated via carbonization of porous Si-PVdF precursors which are directly deposited on the current collector. Unlike the conventional slurry casting method, binder and conductive additives are not used in the preparation of the carbon s...
متن کاملComputational Evaluation of Amorphous Carbon Coating for Durable Silicon Anodes for Lithium-Ion Batteries
We investigate the structural, mechanical, and electronic properties of graphite-like amorphous carbon coating on bulky silicon to examine whether it can improve the durability of the silicon anodes of lithium-ion batteries using molecular dynamics simulations and ab-initio electronic structure calculations. Structural models of carbon coating are constructed using molecular dynamics simulation...
متن کاملScalable preparation of porous silicon nanoparticles and their application for lithium-ion battery anodes
متن کامل
Hollow Porous SiO2 Nanocubes Towards High-performance Anodes for Lithium-ion Batteries
The high theoretical capacity and low discharge potential of silicon have attracted much attention on Si-based anodes. Herein, hollow porous SiO2 nanocubes have been prepared via a two-step hard-template process and evaluated as electrode materials for lithium-ion batteries. The hollow porous SiO2 nanocubes exhibited a reversible capacity of 919 mAhg(-1) over 30 cycles. The reasonable property ...
متن کاملLarge-scale fabrication, 3D tomography, and lithium-ion battery application of porous silicon.
Recently, silicon-based lithium-ion battery anodes have shown encouraging results, as they can offer high capacities and long cyclic lifetimes. The applications of this technology are largely impeded by the complicated and expensive approaches in producing Si with desired nanostructures. We report a cost-efficient method to produce nanoporous Si particles from metallurgical Si through ball-mill...
متن کامل