Classification of explosive residues on organic substrates using laser induced breakdown spectroscopy.
نویسندگان
چکیده
Standoff laser induced breakdown spectroscopy (LIBS) has previously been used to classify trace residues as either hazardous (explosives, biological, etc.) or benign. Correct classification can become more difficult depending on the surface/substrate underneath the residue due to variations in the laser-material interaction. In addition, classification can become problematic if the substrate material has a similar elemental composition to the residue. We have evaluated coupling multivariate analysis with standoff LIBS to determine the effectiveness of classifying thin explosive residue layers on painted surfaces. Good classification results were obtained despite the fact that the painted surface contributes to the LIBS emission signal.
منابع مشابه
Influence of metal substrates on the detection of explosive residues with laser-induced breakdown spectroscopy.
Laser-induced breakdown spectroscopy is a promising approach for explosive residue detection, but several limitations to its widespread use remain. One issue is that the emission spectra of the residues are dependent on the substrate composition because some of the substrate is usually entrained in the laser-induced plasma and the laser-material interaction can be significantly affected by the ...
متن کاملTest of a stand-off laser-induced breakdown spectroscopy sensor for the detection of explosive residues on solid surfaces
The detection and characterization of energetic materials at distances up to 45 m using stand-off laser induced breakdown spectroscopy (LIBS) has been demonstrated. A field-portable open-path LIB spectrometer working under a coaxial configuration was used. A preliminary study allowed choosing a single-pulse laser source over a double-pulse system as the most suitable source for the stand-off an...
متن کاملThe effect of self-absorption correction using internal reference on determining heavy metals concentration by laser induced breakdown spectroscopy
The identification and concentration of heavy metals, which may be so harmful for the body, is determined by the method of calibration-free laser-induced breakdown spectroscopy using a special strategy. First, the plasma temperature is obtained using the Boltzmann plot. Then, a line with an inappreciable self-absorption is considered for each element as the reference. The modified intensities o...
متن کاملLaser-induced breakdown spectroscopy for detection of explosives residues: a review of recent advances, challenges, and future prospects.
In this review we discuss the application of laser-induced breakdown spectroscopy (LIBS) to the problem of detection of residues of explosives. Research in this area presented in open literature is reviewed. Both laboratory and field-tested standoff LIBS instruments have been used to detect explosive materials. Recent advances in instrumentation and data analysis techniques are discussed, inclu...
متن کاملComparison of laser-induced breakdown spectra of organic compounds with irradiation at 1.5 and 1.064 microm.
A comprehensive investigation of laser-induced breakdown spectroscopy (LIBS) at 1.500 microm of residues of six organic compounds (anthracene, caffeine, glucose, 1,3-dinitrobenzene, 2,4-dinitrophenol, and 2,4-dinitrotoluene) on aluminum substrates is presented and compared with LIBS at the Nd:YAG fundamental wavelength of 1.064 microm. The overall emission intensities were found to be smaller a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 51 7 شماره
صفحات -
تاریخ انتشار 2012