Stress Concentration around Countersunk Hole in Isotropic Plate under Transverse Loading
نویسندگان
چکیده
An investigation into the effect of countersunk depth, plate thickness, countersunk angle and plate width on the stress concentration around countersunk hole is carried out with the help of finite element analysis. The variation of stress concentration with respect to these parameters is studied for three types of loading viz. uniformly distributed load, uniformly varying load and functionally distributed load. The results of the finite element analysis are interpreted and some conclusions are drawn. The distribution of stress concentration around countersunk hole in isotropic plates simply supported at all the edges is found similar and is independent of loading. The maximum stress concentration also occurs at a particular point irrespective of the loading conditions. Keywords—Stress Concentration Factor, Countersunk hole, Finite element, ANSYS.
منابع مشابه
Stress Concentrations for Straight-Shank and Countersunk Holes in Plates Subjected to Tension, Bending, and Pin Loading
A three-dimensional stress-concentration analysis was conducted on straight-shank and countersunk (rivet) holes in a large plate subjected to various loading conditions. Three-dimensional nite-element analyses were performed with 20-node isoparametric elements. The plate material was assumed to be linear elastic and isotropic, with a Poisson's ratio of 0.3. Stress concentrations along the bore ...
متن کاملInvestigating the Effect of Stiffness/Thickness Ratio on the Optimal Location of Piezoelectric Actuators Through PSO Algorithm
This article has studied the effect of ratio of stiffness and thickness between piezoelectric actuators and host plat has been explored on optimal pattern for placement of piezoelectric work pieces around a hole in thin isotropic plate under static loading to reduce stress concentration. The piezoelectric actuators reduce directly or indirectly the stress concentration by applying positive and ...
متن کاملAnalysis of Stress Concentration and Deflectionin Isotropic and Orthotropic Rectangular Plates with Central Circular Hole under Transverse Static Loading
The distributions of stresses and deflection in rectangular isotropic and orthotropic plates with central circular hole under transverse static loading have been studied using finite element method. The aim of author is to analyze the effect of D/A ratio (where D is hole diameter and A is plate width) upon stress concentration factor (SCF) and deflection in isotropic and orthotropic plates unde...
متن کاملFinite Plate with Circular and Square Hole under Partial Loading
In this paper a general analytical solution is obtained to find stress distribution in a finite elastic plate with a circular or square hole subjected to arbitrary biaxial partial loading using modified boundary condition by assuming plane stress conditions. The method employed is based on solution of circular hole in finite rectangular plate. This plate is mapped to circular ones and the parti...
متن کاملOptimization of infinite composite plates with quasi-triangular holes under in-plane loading
This study used particle swarm optimization (PSO) to determine the optimal values of effective design variables acting on the stress distribution around a quasi-triangular hole in an infinite orthotropic plate. These parameters were load angle, hole orientation, bluntness, fiber angle, and material properties, which were ascertained on the basis of an analytical method used by Lekhnitskii [3]. ...
متن کامل