The state of the sprayed paint measuring system: through monitoring the spray cone profile
نویسنده
چکیده
The automation of painting process in shipbuilding is arisen as vital issue because of the insufficiency of painting workers and frequent quality claims. The increase of the painting quality is the main achievement made by the automation of the painting process. In order to maintain the good painting quality, even though the spray depth, angle and velocity are considered principally, measuring the state of the sprayed paint is as important as above parameters. In this paper, the system which measures the state of the sprayed paint through monitoring the spray profile to use the laser diode and vision sensor is proposed for the increase of the painting quality. To apply this system at the preparation of the painting, we expect to not only increase of the accuracy of the thickness but also calculate the adjustment amount of CPS data if the measuring results do not equal to the predetermined spray profile.
منابع مشابه
Numerical investigation of the effect of swirl and needle lift profile change on the diesel fuel spray behavior
In this study, the effect of creation swirly flow and needle lift profile change on the behavior of the diesel fuel spray considered. To this end, two phase flow inside the diesel injector was simulated using the CFD. Solid works software has been used for geometry creation and AVL-Fire software has been used for meshing and simulating. Firstly, the liquid flow and spray characteristics of the ...
متن کاملCar paint thickness control using artificial neural network and regression method
Struggling in world's competitive markets, industries are attempting to upgrade their technologies aiming at improving the quality and minimizing the waste and cutting the price. Industry tries to develop their technology in order to improve quality via proactive quality control. This paper studies the possible paint quality in order to reduce the defects through neural network techniques in au...
متن کاملStudies on Soot Formation and Combustion in Turbulent Spray Flames: Modeling and Experimental Measurement
The present study is concerned with measuring and simulating soot formation and combustion in turbulent liquid fuel spray flames. Soot concentrations inside the combustor are measured by filter paper technique. The simulation is based on the solution of the fully-coupled conservation equations for turbulent flow, chemical species kinetic modeling, fuel droplet evaporation and combustion and...
متن کاملThe Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings
Improvement of thermally sprayed coating properties by microstructure modification has been considered as a significant solution. Therefore, in this research the effect of dissolved oxygen content and post heat treatment on the formation and distribution of secondary phase particles, particularly in nano-scale in the coatings during spraying and after that were studied. Ni-5 wt% Al powders were...
متن کاملFluid Dynamics Investigation of a GDI Fuel Spray by Particle Image Velocimetry
In this work, result of experimental investigation on interaction of fuel spray generated by a swirled type injector, with air motion in a prototype cylinder are presented. Experiments were carried out by planar imaging and particle image velocimetry (PIV) techniques in order to provide information about the spray structure evolution and instantaneous velocity distribution of air motion and ...
متن کامل