Decreased consumption of Ca and P during in vitro biomineralization and biologically induced deposition of Ni and Cr in presence of stainless steel corrosion products.
نویسندگان
چکیده
The purpose of this study was to investigate the effects of 316L stainless steel (SS) corrosion products on the in vitro biomineralization process, because tissue necrosis, bone loss, impaired bone mineralization, and loosening of orthopedic implants are associated with ions and debris resulting from biodegradation. Rat bone marrow cells were cultured in experimental conditions that favored the proliferation and differentiation of osteoblastic cells and were exposed to SS corrosion products obtained by electrochemical means for periods ranging from 1 to 21 days. Quantification of total and ionized Ca and P, as well as Fe, Cr, and Ni, ions in the culture media of control and metal added cultures during the incubation period was performed to study the influence of corrosion products on the Ca and P consumption that occurs during the mineralization process. Control cultures and metal effects on cultures were evaluated concerning DNA content, enzymatic reduction of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), and alkaline phosphatase (ALP) activity. Histochemical detection of ALP, Ca, and phosphate deposition, and examination of the cultures by scanning and transmission electron microscopy (SEM and TEM) were also performed. The presence of SS corrosion products resulted in impairment of the normal behavior of rat bone marrow cultures. Levels of Cr and Ni in the medium of cultures exposed to 316L SS corrosion products decreased throughout the incubation period, suggesting a regular deposition of these species; these results were supported by TEM observation of the cultures. Cultures exposed to the corrosion products presented lower DNA content, MTT reduction, and ALP activity and failed to form mineralized areas. These cultures showed negative staining on histochemical reactions for the identification of calcium and phosphate deposition and SEM and TEM examination did not show mineral globular structures or mineralization foci, respectively, which is characteristic of cultures grown in control conditions. These results suggest that metal ions associated with 316L SS are toxic to osteogenic cells, affecting their proliferation and differentiation.
منابع مشابه
Effect of bonding temperature on the microstructure and electrochemical corrosion behavior of TLP bonded AISI 304L stainless steel
Transient liquid phase (TLP) bonding of AISI 304L stainless steel was carried out using BNi-2 amorphous interlayer. The microstructure of the joint area was studied by using optical and scanning electron microscopes and energy dispersive spectroscopy. The effect of bonding temperature (1030-1110 °C) was studied on the microstructure and corrosion behavior of the TLP bonded samples. Electrochemi...
متن کاملInfluence of Ni Deposition and Subsequent N+ Ion Implantation at Different Implantation Energies on Nano-Structure and Corrosion Behavior of 316 Stainless Steels
Nickel films of 300 nm thickness were deposited by electron beam evaporation at room temperature on 316 stainless steels. Corrosion studies of Ni coated 316 SS have been performed after N+ ion implantation at different energies of 20, 40, 60 and 80 keV. The structure and surface morphology of the films were evaluated using X-ray diffraction (XRD), atomic force microscope (AFM) an...
متن کاملElectroless Deposition of Ni-Cu-P Alloy on 304 Stainless Steel by Using Thiourea and Gelatin as Additives and Investigation of Some Properties of Deposits
In this research a layer of Ni-Cu-P was deposited on 304 stainless steels by using gelatin and thiourea as additives in a sulfate solution. In order to determine the properties of deposited layers, a microhardness tester was used for microhardness measurement, X.R.D. for microstructural analysis, and a scanning electron microscope equipped with E.D.X. for determining morphology and analyzing th...
متن کاملEffect of bonding temperature on the microstructure and electrochemical corrosion behavior of TLP bonded AISI 304L stainless steel
Transient liquid phase (TLP) bonding of AISI 304L stainless steel was carried out using BNi-2 amorphous interlayer. The microstructure of the joint area was studied by using optical and scanning electron microscopes and energy dispersive spectroscopy. The effect of bonding temperature (1030-1110 °C) was studied on the microstructure and corrosion behavior of the TLP bonded samples. Electrochemi...
متن کاملCorrosion Behaviour of Nickel Coated AISI 316 Stainless Steel as a Function of Annealing Temperature
AISI 316 stainless steels were coated with 250 nm Ni film by electron beam deposition and post-annealed at different temperatures with a nitrogen flow of 600 cm3min-1 nitrogen. The prepared samples were corrosion tested in 1.0 M sulphuric acid solution using potentiodynamic technique. Crystallographic and morphological structure of the samples were analyzedanalysed by X-ray diffraction (XRD) an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of biomedical materials research
دوره 42 2 شماره
صفحات -
تاریخ انتشار 1998