Important Parameter Groups in Thermal Protection of Polymers

نویسنده

  • John Staggs
چکیده

The problem of thermal protection is explored for two idiosyncratic reactive systems, namely a sacrificial heat-sink material and an intumescent system where a dynamically evolving insulation layer is produced from an initially thin coating. Relatively simple mathematical models of both systems are proposed that encompass the important physical characteristics of each situation and these models are analysed using a mixture of numerical and analytical techniques. Important dimensionless parameter groups are identified and domains of parameter space where thermal performance is particularly good- or particularly bad- are identified.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of the Thermal Comfort Properties and Heat Protection Performance of Cotton/Nylon-Kermel Fabrics

In this research, fire and radiant heat protection and thermal comfort properties of cotton/nylon-Kermel blended woven fabrics, were utilized to predict the thermal comfort and protection limit of this fabric structure based on Woo and Barker developed model. The results showed that the porosity, the air permeability and the thermal resistance increased with Kermel fiber blend ratio. Conversely...

متن کامل

Chemical modification of maleic anhydride polymers with carbazole

Maleic anhydride (MAN) copolymers with methyl methacrylate(MMA), ethyl methacrylate(EMA), methyl acrylate(MA), ethyl acrylate (EA) and buthyl acrylate (BA) ( in a 1:1 mole ratio) were synthesized by free radical polymerizations method under vacuum -azobis(isobutironitrile)(AIBN) as an initiator of reaction at 701C. The copolymer compositions were determined using related 1H NMR spectra techni...

متن کامل

Preparation and Properties of Thermally Stable Polyureas Containing Ether and Ketone Units

The main objective of this search was to prepare novel soluble polyureas with improved thermal stability. Accordingly, a new types of polyureas was prepared through the polycondensation reaction of a prepared diamine containing ether, keto, and naphthyl groups with 4,4’-diphenylmethan diisocyanate (MDI), toluene-2,4-diisocyanate (TDI), and isophorone diisocyanate (IPDI) in N-methyl-2-pyrrol...

متن کامل

Synthesis and Characterization of Acrylic Copolymers of 4-Chloromethyl Styrene with Incorporation of Phthalimide Groups and Amination of Resulted Polymers

4-ChloroMethyl Styrene (CMS) was copolymerized with different monomers such as Methyl MethAcrylate (MMA), Methyl Acrylate (MA), 2-EthylHexyl Acrylate (EHA) by free radical polymerization method at 70 ±1°C using a,a'-Azobis(IsoButyroNitrile) (AIBN) as an initiator. The copolymer compositions were obtained using related 1HNMR spectra and the poly...

متن کامل

Synthesis and Characterization of Polyamide Containing Maleimide Pendant Group

A series of new polyamides containing maleimide pendant group were prepared by low temperature polycondensation of 5-(4-(2,5-dioxo-2H-pyrrol-1(5H)-yl)benzamido)isophthaloyl chloride as a new monomer with various aromatic diamines in NMP. Monomer and polymers structures were identified through FT-IR, 1H-NMR and elemental analysis. Obtained polymers were soluble in polar solvents and non solu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 8  شماره 

صفحات  -

تاریخ انتشار 2015