Analysis of Multiphase Boost Converter for High Power Application
نویسنده
چکیده
In this paper, a multiphase boost converter is proposed to achieve high voltage gain and high power gain. The proposed converter operates in continuous conduction mode (CCM) with soft switching of main and auxiliary devices. The transformer in a conventional converter is replaced by an auxiliary circuit which provides the desired voltage and power levels. The zero voltage switching (ZVS) and zero current switching (ZCS) of the devices is achieved in this topology. The proposed converter is configured with proper number of series and parallel connected basic cells in order to obtain the required output voltage and power levels respectively. Simulation results are presented for a 380V, 750W and 230V, 3000W loads.
منابع مشابه
An Efficient High-Step-Up Soft-Switching Boost Converter for Photovoltaic Application
In this paper an efficient high step-up converter with a coupled- inductor with soft- switching operation is presented. The proposed topology includes a coupled-inductor boost converter for raising the voltage gain. Moreover, a simple auxiliary resonant circuit composed of an auxiliary switch, a clamping diode and a resonant tank (inductor, capacitor), is adopted in this paper. The coupled-indu...
متن کاملImplementation of Floating Output Interleaved Input DC-DC Boost Converter
This paper presents the analysin ,design and implementation of a high voltage ratio topology of DC-DC converter. The DC-DC converter has high voltage ratio with reduced input current, output voltage and output current ripple, and also reduces the voltage and current rating of power electronics components and compared with conventional boost converter. The voltage stress on the switches are red...
متن کاملA Multi-port High Step-up DC/DC Converter for Hybrid Renewable Energy Application
This paper presents a novel multi-port DC/DC converter which is suitable to be used as the interface of hybrid renewable energy systems. The converter contains three unidirectional power flow ports which two of them are input ports and are connected to two independent energy sources while the third one is the output port that feeds a standalone load. Furthermore, the proposed converter contains...
متن کاملHigh performance Cuk converter considering non-linear inductors for photovoltaic system applications
The Cúk converter, which has voltage buck and boost ability, offers high flexibility as an interface device for solar panels. In addition, current ripple can be more reduced because of two input and output inductors at both sides. This paper presents a new application of current-variable inductors in a Cúk converter that reduces the size and capacity of storage elements. Because of two inductor...
متن کاملAnalysis and Experimentation of Soft Switched Interleaved Boost Converter for Photovoltaic Applications
Conventional energy sources are fast depleting due to poor conservation practises and excessive usage while the world’s energy demands are growing by minute. Additionally, the cost of producing conventional energy is rising also leading to an increase in harmful environmental pollution. Hence, there is a need to look at alternative energy sources such as sun, water and wind. Photovoltaic (PV) i...
متن کامل