The Squeezing of Liquid out of a Structured Dispersion

نویسنده

  • H.
چکیده

Lee R. White's note (J. Colloid Interface Sci. 95, 286, 1983) reads: "The theoretical derivation of the Derjaguin approximation originally presented was, to say the least, misleading and is still the cause of misunderstanding in the literature." Lee R. White, with a view to "correcting" my derivation and eliminating the misunderstanding arisen, has presented a derivation of the formula [18], suitable for any case of interaction of the surfaces of any curvature with arbitrarily mutually oriented principal axes of the system. However, just the same derivation is contained in my paper published in Kolloidn. Zh. (69, 155, 1934), which has been cited by Lee R. White. The particular case of this formula, i.e., the inversely proportional dependence of the threads adhesion force on the sine of the angle between their axes, was used in a number of works. Thus, it is quite natural that the final formulas expressing the dependence of the surfaces interaction force on the distance and geometry of the surfaces completely coincide with each other. By the way, the same derivation was published in English in the monograph written by B. V. Derjaguin et al. and entitled "Adhesion of Solid Bodies" (Plenum, New York, 1978). Hence, the following conclusion is made: in order to avoid misunderstanding, one should not only cite a paper, but also, at least, take a quick look through it. It is particularly important when the object consists in making a criticism of the article or supplementing it.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Simple Theoretical Model for Prediction of Phase Inversion

Phase inversion in liquid-liquid dispersions corresponds to the transitional boundary between Oil-in-Aqueous dispersion and Aqueous-in-Oil dispersion. A theoretical model based on simple assumptions was proposed to predict phase inversion point, ambivalence region and the hysteresis effect of inversion. Experimental data from the literature were used to validate the model and results were c...

متن کامل

A Study of Entanglement and Squeezing of

We study entanglement and squeezing of a cluster of spin systems under the influence of the two-axis countertwisting Hamiltonian. The squeezing parameters given by Wineland et al and also by Kitagawa et al. are chosen as the criteria of spin squeezing. The criterion of pairwise entanglement is chosen to be the concurrence and that of the bipartite entanglement the linear entropy. We also define...

متن کامل

Experimental Investigation of Phase Inversion of Liquid-Liquid Systems in a Spray Extraction Column

An experimental study of the phase inversion behavior of liquid-liquid dispersion has been conducted in a spray extraction column for systems of toluene / water, n-hexane/water, CCl4/water, toluene /water + glycerol (25 % wt), toluene + CCl4 (25 % wt) / water and toluene / acetic acid (5 % wt)/water. The effects of physical properties, mass transfer and column geometry...

متن کامل

Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods

The various industrial and engineering applications of flow of fluid between parallel plates have continued to generate renewed interests. In this work, a comparative study of approximate analytical methods is carried out using differential transformation,homotopy perturbation, Adomian decomposition, variation of parameter and variational iteration methods for the analysis of a steady two-dimen...

متن کامل

Control Of C/Ti Ratio in Titanium Carbide - Copper Master Alloys Produced by SHS Reactions and its Effect on the Carbide Dispersion In Liquid Copper

Titanium carbide is used as an attractive reinforcement to produce particulate metal matrix composites. One of the problems to use this carbide as a reinforcement in copper-based composites is the lack of wetability in Cu-TiC system. This property improves as the C/Ti ratio in carbide decreases.&#10Problems to use this carbide as a reinforcement in copper-based composites is the lack of wetabii...

متن کامل

Control Of C/Ti Ratio in Titanium Carbide - Copper Master Alloys Produced by SHS Reactions and its Effect on the Carbide Dispersion In Liquid Copper

Titanium carbide is used as an attractive reinforcement to produce particulate metal matrix composites. One of the problems to use this carbide as a reinforcement in copper-based composites is the lack of wetability in Cu-TiC system. This property improves as the C/Ti ratio in carbide decreases. Problems to use this carbide as a reinforcement in copper-based composites is the lack of wetabiity...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004