Synthesis and Characterization of Ti-Si-C-N Nanocomposite Coatings Prepared by a Filtered Vacuum Arc with Organosilane Precursors
نویسندگان
چکیده
منابع مشابه
Characterization of TiN, CrN and (Ti, Cr) N Coatings Deposited by Cathodic ARC Evaporation
In this investigation PVD Ti-Cr)N coatings were deposited on hardened and tempered tool steel substrates using reactive arc evaporation. Physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and modulus young and coefficient friction were evaluated. Phase compositions were studies by X-ray diffraction method. The surface microstructure and morp...
متن کاملStructure of Lattice Strain and effect of sol concentration on the characterization of TiO2-CuO-SiO2 nanoparticles
We report on the synthesis, morphology, chemically and structurally of TiO2-CuO-SiO2 nanostructure with different precursors molar ratio and calcined temperatures. In the present work, ternary reactive powders in the TiO2-CuO-SiO2 systems have been obtained using the sol-gel method, by the simultaneous gelation of all cations. The compounds and other ...
متن کاملStructure of Lattice Strain and effect of sol concentration on the characterization of TiO2-CuO-SiO2 nanoparticles
We report on the synthesis, morphology, chemically and structurally of TiO2-CuO-SiO2 nanostructure with different precursors molar ratio and calcined temperatures. In the present work, ternary reactive powders in the TiO2-CuO-SiO2 systems have been obtained using the sol-gel method, by the simultaneous gelation of all cations. The compounds and other ...
متن کاملSynthesis and Characterization of PbTiO3 Nanopowders by Citric Acid Gel Method
High purity lead titanate nanopowders in tetragonal form have been successfully prepared bycitric acid gel method using lead nitrate and tetra-n-butyl titanate as Pb and Ti sourcesrespectively and citric acid as complexing reagent. The precursors were calcined at varioustemperatures ranging from 450 °C to 600 °C for 2 h. Fourier Transform InfraredSpectroscopy (FT-IR), X-ray diffraction (XRD) an...
متن کاملStructural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique
In the present work, structural characteristics and tribological properties of the Ti-Al-Cr-(Si)-C-N nanocomposite films coated on the SPK 1.2080 tool steel byPVD technique have been investigated. The PVD coating process was carried out using Ti (Si) Al and CrAl cathodes at 150 A current, 40 V bias and (Ar)0.1(CH4)0.45(N2)0.45 gas mixture for 50 min. Evaluations were conducted by OM, FESEM, AFM...
متن کامل