Mixed convection heat transfer in two-dimensional open-ended enclosures
نویسندگان
چکیده
Mixed convection heat transfer in open-ended enclosures has been studied numerically for three different flow angles of attack. Discretization of the governing equations is achieved using a finite element scheme based on the Galerkin method of weighted residuals. Comparisons with previously published work on special cases of the problem are performed and the results show excellent agreement. A wide range of pertinent parameters such as Grashof number, Reynolds number, and the aspect ratio are considered in the present study. The obtained results show that thermal insulation of the cavity can be achieved through the use of high horizontal velocity flow. Various results for the streamlines, isotherms and the heat transfer rates in terms of the average Nusselt number are presented and discussed for different parametric values. 2002 Elsevier Science Ltd. All rights reserved.
منابع مشابه
Laminar mixed convection of Cu-water nano-fluid in two- sided lid-driven enclosures
The fluid flow and heat transfer in lid-driven enclosures filled with Cu-water nanofluid is numerically investigated. The moving vertical walls of the enclosure are maintained in a constant temperature, while the horizontal walls are insulated. The hybrid scheme is used to discretize the convection terms and SIMPLER algorithm is adopted to couple the velocity field and pressure in the momentum...
متن کاملEnhancement of Natural Convection Heat Transfer in Annular Enclosures
Natural convection heat transfer was investigated experimentally in a concentric-cylinders annulus. To enhance the rate of heat transfer, pin fins were installed on the surface of the inner cylinder. Two fin arrangements were employed, namely, staggered and in-line arrangements. The length of the fins varied from 2 to 8 cm and the Rayleigh number Ra changed in the range from 5 x 105 to 5 x 106...
متن کاملEffects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities
In this paper, mixed forced and natural convection heat transfer in a rectangular cavity has been numerically studied. the cavity receives a uniform heat flux from one side and is ventilated with a uniform external flow. The external flow enters the cavity from the heated side and leaves the cavity from the opposite side. The velocity and temperature fields and heat transfer rate are determined...
متن کاملEffects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities
In this paper, mixed forced and natural convection heat transfer in a rectangular cavity has been numerically studied. the cavity receives a uniform heat flux from one side and is ventilated with a uniform external flow. The external flow enters the cavity from the heated side and leaves the cavity from the opposite side. The velocity and temperature fields and heat transfer rate are determined...
متن کاملNumerical Predictions of Turbulent Mixed Convection Heat Transfer to Supercritical Fluids Using Various Low Reynolds Number k-e Turbulence Models
There are a number of systems in which supercritical cryogenic fluids are used as coolants or propellant fluids. In some modern military aircraft, the fuel is pressurized above its critical point and used as a coolant to remove heat from the aircraft engine. Accurate prediction of heat transfer coefficients to turbulent flows of supercritical fluids is essential in design of such systems. One o...
متن کامل