The measurement of properties in carbon nanotube yarns
نویسندگان
چکیده
The paper focuses on the importance of using specific values (values where the axial property is normalised by dividing by density) for properties of CNT yarn-like fibres to avoid the huge uncertainties introduced by the state of lateral compression of the yarn, a difficulty not only associated with the measurement of cross sectional area, but exacerbated by the influence of winding forces and indeed gripping forces while under test. Even with the disciplined use of specific parameters, there are also serious issues regarding axial mechanical tests and measurements of thermal conductivity. These are discussed as well.
منابع مشابه
2010: Structure and Process Dependent Properties of Solid-State Spun Carbon Nanotube Yarns
Introduction We have previously reported downsizing ancient twistbased spinning technology for making continuous, densified nanotube yarns from multi-walled carbon nanotube (MWNT) forests [1]. Such nanotube yarns provide unique properties and property combinations. Despite this important progress, the relationship between nanotube yarn properties and component carbon nanotube properties is not ...
متن کاملStructure and process-dependent properties of solid-state spun carbon nanotube yarns.
The effects of processing conditions and apparent nanotube length on properties are investigated for carbon nanotube yarns obtained by solid-state drawing of an aerogel from a forest of multi-walled carbon nanotubes. Investigation of twist, false twist, liquid densification and combination methods for converting the drawn aerogel into dense yarn show that permanent twist is not needed for obtai...
متن کاملFrom Carbon Nanotube Yarns to Sensors: Recent Findings and Challenges
Carbon nanotube (CNT) arrays can be drawn into a web and then twisted into threads. These CNT threads contain thousands of carbon nanotubes in their cross-section and can be further composed into yarns consisting of one or more threads. CNT yarns exhibit significant mechanical stiffness and strength and low electrical resistivity. More importantly, CNT yarns exhibit piezoresistance that could b...
متن کاملFiber and fabric solar cells by directly weaving carbon nanotube yarns with CdSe nanowire-based electrodes.
Electrode materials are key components for fiber solar cells, and when combined with active layers (for light absorption and charge generation) in appropriate ways, they enable design and fabrication of efficient and innovative device structures. Here, we apply carbon nanotube yarns as counter electrodes in combination with CdSe nanowire-grafted primary electrodes (Ti wire) for making fiber and...
متن کاملMechanical and Electrical Properties of Carbon Nanotube / Polydimethylsiloxane Composites Yarn
Carbon nano tube (CNT) yarn is an axially aligned CNT assembly. It has great potential many applications. In this study, the mechanical and electrical properties of the aerogel-spun CNT yarns and CNT/Polydimethylsiloxane (PDMS) composite yarns were investigated. The CNT/PDMS yarn was fabricated by droplet infiltration of PDMS solution into the aerogel-spun CNT yarn. The mechanical properties of...
متن کاملEffects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties
In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...
متن کامل