Comparative Computational Analysis of Drag-reducing Devices for Tractor-trailers

نویسنده

  • V. Malviya
چکیده

Constant rise in fuel price in recent times has caused manufacturers of heavy commercial vehicles (HCV) to turn to efficient aerodynamic design of trucks, wagons, tractors as well as trailers. The comparative analysis in this study compares the coefficient of drag of the following four aerodynamic configurations of a tractor-trailer combination: 1. Semi-trailer with no devices. 2. Semi-trailer with cab roof fairing. 3. Semi-trailer with the proposed rolling pin device. 4. Semi-trailer with the proposed rolling pin device and the cab roof fairing. The overall coefficient of drag for the tractor-trailer combination for the above four configurations is computed and compared along with that of individual critical surfaces to analyse the effect of two major drag-reducing devices, the cab roof fairing and the momentum injection rolling pin. The pressure distribution in the flow field around the vehicle is studied to understand the flow mechanisms involved in the reduction in overall drag.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cfd Investigation of a Novel Fuel-saving Device for Articulated Tractor-trailer Combinations

Enhancing the aerodynamic efficiency of commercial vehicles is gaining increasing importance as it helps to reduce both overall fuel consumption as well as emissions. This paper investigates the advantages offered by a novel fuel-saving device for such vehicles. This device uses a moving surface to impart additional kinetic energy to flow near the roof surface. The additional momentum in the fl...

متن کامل

Tractor Trailer Base Region Drag Optimization by a Genetic Algorithm with CFD

A computational fluid dynamics (CFD) code has been combined with a genetic algorithm (GA) to perform a two-dimensional drag minimization on the base region of tractor trailers. Few studies have been conducted with CFD driven by a GA due to extensive run times and the general non autonomous characteristics of meshing a suitable CFD geometry. This study solves the two-dimensional Reynolds-average...

متن کامل

Dynamics analysis of microparticles in inertial microfluidics for biomedical applications

Inertial microfluidics-based devices have recently attracted much interest and attention due to their simple structure, high throughput, fast processing and low cost. They have been utilised in a wide range of applications in microtechnology, especially for sorting and separating microparticles. This novel class of microfluidics-based devices works based on intrinsic forces, which cause micropa...

متن کامل

DOE Project on Heavy Vehicle Aerodynamic Drag FY 2005 Annual Report

With rising oil prices, the issue of energy economy in transportation is getting much attention. At the same time, new emissions standards for tractor-trailer vehicles introduce additional challenges for the manufacturers to achieve improvements in vehicle fuel economy. As part of the U.S. Department of Energy Office of FreedomCAR and Vehicle Technologies’ Heavy Vehicle Aerodynamic Drag Consort...

متن کامل

Understanding Practical Limits to Heavy Truck Drag Reduction

A heavy truck wind tunnel test program is currently underway at the Langley Full Scale Tunnel (LFST). Seven passive drag reducing device configurations have been evaluated on a heavy truck model with the objective of understanding the practical limits to drag reduction achievable on a modern tractor trailer through add-on devices. The configurations tested include side skirts of varying length,...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015