Design, Construction and Analysis of a Telepresent Microassembly System
نویسندگان
چکیده
This paper investigates the design and construction of a telepresent microassembly system and the influence of real networks on precise telepresent microassembly. The application of telepresence technologies in small-lot microassembly production systems provides a number of advantages, including increased precision, improved ergonomics, decreased contamination through the removal of direct human contact, and the ability to remotely control the microassembly scenario. Although this last advantage can be very useful, it also provides a threat in that the employed network could introduce delays into the system. Such delays negatively affect the precision of operations. The first aim of this research is to design and construct a flexible telepresent microassembly system. The second aim is to evaluate this system under real-world network conditions for typical microassembly tasks.
منابع مشابه
SIMULTANEOUS ANALYSIS, DESIGN AND OPTIMIZATION OF WATER DISTRIBUTION SYSTEMS USING SUPERVISED CHARGED SYSTEM SEARCH
The present study encompasses a new method to simultaneous analysis, design and optimization of Water Distribution Systems (WDSs). In this method, analysis procedure is carried out using Charged System Search (CSS) optimization algorithm. Besides design and cost optimization of WDSs are performed simultaneous with analysis process using a new objective function in order to satisfying the analys...
متن کاملDesign and Construction of a Seismometer Based on the Moiré Technique: Detailed Theoretical Analysis, Experimental Apparatus, and Primary Results
We have built a vertical seismometer that works based on the moiré technique. One grating is attached to the suspended mass and one to the frame of the instrument. The two gratings are in relative motion, and the resulting moiré pattern magnifies this motion. The intensity of a light beam passing through the moving moiré fringes changes with time, and a light detecting syst...
متن کاملDesign and construction of a helium purification system using cryogenic adsorption process
One of the most appropriate methods for elimination of trace impurities in helium is cryogenic adsorption process. So, in this study design and construction of cryogenic adsorption helium purification system (3 Nm3.hr-1, 80 bar) carried out using activated carbon as adsorbent at 77K. To evaluation of adsorption dynamics and effect of pressure on elimination of trace impurities, helium purificat...
متن کاملDesign and Construction of a Sensitive Capasitive Sensor System (RESEARCH NOTE)
Design and construction of a capacitor sensor with a precise readout system are described in this paper. A variable air-gap capacitive transducer was constructed and for signalmeasurement a successful attempt was made to exploit the capacitance changes in terms of the phase angle of the detected signal. The reported setup makes it possible to detect capacitance changes of the order of 2.5 fF in...
متن کاملDesign and analysis of hybrid systems solar, wind, osmotic for green plants using ant colony optimization algorithm
Nature has always proven that it is able to overcome its problems. However, human manipulation has led to environmental degradations. The dryness of a thousand-year Urmia Lake (a brinewater lake in Iran) is an example of environmental degradation that happened due to successive droughts and construction of dams on the basin of this lake. This study examines methods for the revival of Urmia Lake...
متن کامل