Dual-band Bandpass Filter Using Composite Coupling Structure for CPW/Microstrip
نویسندگان
چکیده
By using a composite coupling structure for coplanar waveguide (CPW)/microstrip, a new dual-band bandpass filter (DBBPF) stacking inverted Y-shaped CPW resonators and rectangular ring resonators is proposed. Two resonant frequency bands are simultaneously excited by the CPW feed line. However, it can be convenient to tune individually. Several transmission zeros are realized to improve the selectivity of the filter and achieve wide stopband rejection. Good agreement between simulated and measured results demonstrates the validity of this DBBPF.
منابع مشابه
Fractal Bandpass Filter Using Y-shaped Dual-Mode Resonator for C-Band Receiver (Research Note)
In this study, a fractal, Y-shaped dual-mode resonator bandpass filter (BPF) with input-output cross-coupling is introduced. A parallel-coupling feed structure with a cross coupling has been used to generate two transmission zeroes (TZs) near the lower and upper cutoff frequency that can effectively improve the passband edge selectivity. Also, a fractal shaped based on conventional diamond and ...
متن کاملA Compact Ultra-Wideband Bandpass Filter with Sharp-Rejection using Complementary Split Ring Resonators
A compact and sharp-rejection ultra-wideband (UWB) microstrip band-pass filter (BPF) is developed using of left handed metamaterials realized by complementary split ring resonator (CSRR). Moreover, proposed structure consists of two doublets parallel coupling gaps at each side of a microstrip ring. In comparison with some other filters, this structure shows a significantly wider passband due to...
متن کاملA Compact Ultra-Wideband Bandpass Filter with Sharp Roll-off Based on CPW-to-Microstrip Coupling Structure
In this paper, a compact ultra-wideband bandpass filter using a back to back Coplanar Waveguide (CPW)-to-microstrip transition structure is proposed. Compared with traditional ultrawideband bandpass filters using hybrid structures, the proposed filter has a sharper selectivity because of two transmission zeros located at the lower and upper edges of the passband, respectively, generated by a mo...
متن کاملDesign and Implementation of Microwave Dual-Band Bandpass Filters Using Microstrip Composite Resonators
In this paper, a novel type of dual-band bandpass filter (DBBPF) is proposed by using microstrip composite resonators, and its design method is developed based on the lumped-element equivalent circuit of the filter. Both the midband frequencies and the passband widths of the dual bands of the filter can be controlled separately. Four DBBPFs with different specifications are designed, fabricated...
متن کاملNovel Design of Microstrip Bandpass Filters with a Controllable Dual-Passband Response: Description and Implementation
Novel microstrip dual-band bandpass filters with controllable fractional bandwidths and good in-between isolation are presented and implemented. A half-wavelength stepped-impedance resonator is firstly characterized, aiming at producing the two resonant frequencies at 2.4 and 5.2 GHz. Two types of coupled microstrip lines in the parallel and anti-parallel formats are then investigated in terms ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015