Comparison of Vibration and Acoustic Pressure Reduction Using Different Types of Piezo actuators
نویسندگان
چکیده
This paper presents results of numerical simulations on reduction of sound pressure radiated from a square plate using different types of piezo actuators. For this purpose a FEM model was developed using ANSYS software with said steel plate with a hemisphere of air on one side of the plate. There are two criteria by which the reduction is measured: minimising vibrations of plate area and minimising sound pressure on a half sphere surrounding the plate. Changes in the results for both the radiated sound pressure and plate vibration are discussed.
منابع مشابه
Efficiency Assessment of Acoustic Cabin for Providing Acoustic Comfort in Turbine Unit of a Thermal Power Plant
Background and Objective: A practical method for noise control in environments with different noise sources is designing an acoustic cabin for the workers. In this regard, this study aimed to assess the efficiency of the acoustic cabin in a typical turbine unit of a thermal power plant to provide acoustic comfort. Materials and Methods: Measurement of the noise level and spectrum, as well as v...
متن کاملBroadband active control of noise and vibration in a fluid-filled pipeline using an array of non-intrusive structural actuators
Fluid-filled pipelines occur in a wide variety of installations where they are excited by sources such as pumps and compressors through both the structure of the pipe wall and the fluid in the system. These vibrations may propagate downstream and result in unwanted radiated noise from the pipeline or connected structures. Although passive measures are available to control both structure and flu...
متن کاملBuckling and Postbuckling of Concentrically Stiffened Piezo-Composite Plates on Elastic Foundations
This research presents the modeling and analysis for the buckling and postbuckling behavior of sandwich plates under thermal and mechanical loads. The lay-up configurations of plates are laminated composite with concentric stiffener and surface mounted piezoelectric actuators. The plates are in contact with a three-parameter elastic foundation including softening and/or hardening nonlinearity. ...
متن کاملImproving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method
In this paper, a new non-contact ultrasonic abrasive finishing mechanism is designed and fabricated. This mechanism combines the function of ultrasonic vibrations and the magnetic abrasive finishing (MAF) process. A permanent magnet which is mounted on a horn has been used as the processing tool. This polishing tool is vibrated at an ultrasonic frequency with piezo-electric actuators. Ultrasoni...
متن کاملHigher-Order Stability Analysis of Imperfect Laminated Piezo-Composite Plates on Elastic Foundations Under Electro-Thermo-Mechanical Loads
This article provides a fully analytical approach for nonlinear equilibrium path of rectangular sandwich plates. The core of structure is made of symmetric cross-ply laminated composite and the outer surfaces are piezoelectric actuators which perfectly bonded to inner core. The structure is subjected to electro-thermo-mechanical loads simultaneously. One side of plate is rested on Pasternak typ...
متن کامل