Development of a Compact Axial Active Magnetic Bearing with a Function of Two-Tilt-Motion Control
نویسندگان
چکیده
A compact axial active magnetic bearing with a function of two-tilt-motion control is fabricated which has a new configuration of magnetic poles. They consist of four cylindrical poles with coils and a single common pole whose opposite plane of the rotor has a permanent magnet to achieve multi-degree-of-freedom zero power control. Modal control is applied because local zero power control may make the whole system unstable when the number of control channels is larger than the number of freedoms of motion to be controlled. In the developed system, a disk-shape rotor is sandwiched between two axial magnetic bearing stators that are operated differentially. Such a configuration makes it possible to rotate the rotor without disturbing the axial motion. The characteristics of the fabricated magnetic bearing system including rotation are studied experimentally.
منابع مشابه
H∞ Robust Controller Design and Experimental Analysis of Active Magnetic Bearings with Flexible Rotor System
H∞ controller for active magnetic bearings (AMBs) with flexible rotor system was designed in this paper. The motion equations of AMBs and flexible rotor system are built based on finite element methods (FEM). Weighting function matrices of H∞ controller for AMBs are studied for both the sensitivity and the complementary sensitivity of H∞ control theory. The simulation shows that the H∞ control ...
متن کاملA Compact Magnetic Bearing System for Axial Flow Blood Pump
In this paper, a compact magnetic bearing system has been developed for axial flow blood pumps. The system is composed of two radial hybrid magnetic bearings (HMBs) and a brushless permanent magnet DC motor. The impeller of the pump is enclosed in the rotor that is suspended by the two HMBs with five-degree of freedom (DOF) control, among which four radial directions are actively controlled, an...
متن کاملAnalysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System (RESEARCH NOTE)
Crack fault of rotor is one of the most prominent problems faced by magnetic bearing rotor system. In order to improve the safety performance of this kind of machinery, it is necessary to research the vibration characteristics of magnetic bearing cracked rotor system. In this paper, the stiffness model of the crack shaft element was established by the strain energy release rate (SERR) theory. T...
متن کاملTwo-Dimensional Compact Inversion of Magnetic Data in the Presence of Remanent Magnetization
Remnant magnetization causes a change in the direction and intensity of the magnetization vector. If inversion is performed regardless of remnance, in some cases it may have unreliable and misleading results. For inversion with respect to remnant magnetization, several solutions have been proposed so far, one of which is to convert the data of total magnetic field into data that is independent ...
متن کاملCombination Radial-axial Magnetic Bearing
The design and application of a patented active actuator design that combines the radial and axial actuator into one combination radial-axial actuator is presented. The theory of operation of the actuator is defined and magnetic finite element analysis modeling shown verifying operation. Its mechanical construction is then presented to show how this actuator configuration is successfully integr...
متن کامل