Pressure Drop in Microchannels Filled with Porous Media
نویسنده
چکیده
The pressure drop in microchannels filled with porous media formed by square arrays of cylinders (micro-porous channels) is investigated. Combining the Brinkman equation and the existing models for permeability of regular arrays of cylinders, the pressure drop in the considered micro-porous channels is calculated theoretically. Soft lithography method is used to fabricate several Polydimethylsiloxane (PDMS) microporous-channels with porosities in the range of 0.35 to 0.95, fiber diameters varying from 50 to 400 , and channel depth of approximately 100 . Distilled water is pushed through the samples using a syringe pump with steady flow rate and the resulting pressure drops are measured for several flow rates. The theoretical model captures the trends of experimental data for all of the samples. Our analysis indicates that a competing behaviour exists between the permeability and the channels dimensions for controlling the pressure drop. Therefore, the Darcy number should be used to determine the dominating parameter.
منابع مشابه
Biomass plug development and propagation in porous media.
Exopolymer-producing bacteria can be used to modify soil profiles for enhanced oil recovery or bioremediation. Understanding the mechanisms associated with biomass plug development and propagation is needed for successful application of this technology. These mechanisms were determined from packed-bed and micromodel experiments that simulate plugging in porous media. Leuconostoc mesenteroides w...
متن کاملElectrokinetic pumping effects of charged porous media in microchannels using the lattice Poisson-Boltzmann method.
The electrokinetic pumping characteristics of nanoscale charged porous media packed in microchannels are investigated using a mesoscopic evolution method. When the pore size of porous media is comparable to the thickness of electric double layer, the effects of particle surface potentials on the bulk electric potential distribution will not be negligible. The lattice Poisson-Boltzmann method pr...
متن کاملA NUMERICAL STUDY OF SINGLE-PHASE FORCED CONVECTIVE HEAT TRANSFER WITH FLOW FRICTION IN MICROCHANNELS (RESEARCH NOTE)
Three-dimensional simulations of the single-phase laminar flow and forced convective heat transfer of water in microchannels with small rectangular sections having specific hydraulic diameters and distinct geometric configurations were investigated numerically. The numerical results indicated that the laminar heat transfer was to be dependent upon the aspect ratio and the ratio of the hydraulic...
متن کاملPropionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer
In this work, extraction of propionic acid from the aqueous phase to the organic phase (1-octanol) was performed in T-junction microchannels and effects of channel diameter and fluid flow rate on the mass transfer characteristics were investigated. The two-phase flow patterns in studied microchannels with 0.4 and 0.8 mm diameters were observed. Weber number and surface-to-volume ratio were ca...
متن کاملInvestigation of Natural Convection in a Vertical Cavity Filled with a Anisotropic Porous Media
In present paper, a numerical analysis for a rectangular cavity filled with a anisotropic porous media has been studied. It is assumed that the horizontal walls are adiabatic and impermeable, while the side walls of the cavity are maintained at constant temperatures and concentrations. The buoyancy force that induced the fluid motion are assumed to be cooperative. In the two extreme cases o...
متن کامل