Distributed Brillouin fiber sensor for detecting pipeline buckling in an energy pipe under internal pressure.
نویسندگان
چکیده
A distributed Brillouin fiber sensor has been employed to detect localized pipe-wall buckling in an energy pipe by measuring the longitudinal and hoop strain distributions along the outer surface of the pipe for the first time. The locations of the localized pipe-wall buckling are found and distinguished using their corresponding strain-load data. The formation of the buckling process for the compression and tension characters is studied in the longitudinal and hoop directions. For the pipe with internal pressure, concentric load, and bending load, a localized pipe-wall buckling takes place away from the middle of the pipe on the compressive side and a strain peak with an overall buckling occurs on the tensile side according to the longitudinal strain distributions along the pipe. Different strains on two neutral lines are also observed in the hoop strain distribution, which should be caused by the pipe weld joint.
منابع مشابه
Pipeline upheaval buckling in clayey backfill using numerical analysis
Offshore pipelines used for oil and gas transportation are often buried to avoid damage from fishing activities and to provide thermal insulation. Thermal expansion and contraction of the pipeline during operation can lead to lateral or upheaval buckling. A safe buried pipeline design must take into account a reliable evaluation of soil uplift resistance and pipe embedment depth. While the cost...
متن کاملDistributed Pressure and Temperature Sensing Based on Stimulated Brillouin Scattering
Brillouin scattering has been verified to be an effective mechanism in temperature and strain sensing. This kind of sensors can be applied to civil structural monitoring of pipelines, railroads, and other industries for disaster prevention. This thesis first presents a novel fiber sensing scheme for long-span fully-distributed pressure measurement based on Brillouin scattering in a side-hole fi...
متن کاملRecent Progress in Distributed Fiber Optic Sensors
Rayleigh, Brillouin and Raman scatterings in fibers result from the interaction of photons with local material characteristic features like density, temperature and strain. For example an acoustic/mechanical wave generates a dynamic density variation; such a variation may be affected by local temperature, strain, vibration and birefringence. By detecting changes in the amplitude, frequency and ...
متن کاملDetection of Ceramic Cracks Using a Distributed High-Resolution Brillouin Fiber Optic Sensor
A distributed sensor system is highly desirable for detecting, locating, and monitoring fine cracks at unknown locations in advanced ceramics. This paper presents a distributed high-resolution fiber optic sensor based on the Brillouin scattering principle, and its application in ceramic crack detection for the first time. The existence of cracks, together with their locations, is identified by ...
متن کاملEffect of the finite extinction ratio of an electro-optic modulator on the performance of distributed probe-pump Brillouin sensor systems.
The effect of the finite extinction ratio of an electro-optic modulator (EOM) on the Brillouin frequency measurement of a distributed Brillouin-based fiber optic sensor is studied. An EOM with a finite extinction ratio limits the application of Brillouin optical time domain analysis in a distributed Brillouin-based fiber optic sensor. This results in confusion in specifying the location of the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 45 14 شماره
صفحات -
تاریخ انتشار 2006