Confinement of photopolymerization and solidification with radiation pressure.

نویسندگان

  • Syoji Ito
  • Yoshito Tanaka
  • Hiroyuki Yoshikawa
  • Yukihide Ishibashi
  • Hiroshi Miyasaka
  • Hiroshi Masuhara
چکیده

Controlling chemical reactions within a small space is a significant issue in chemistry, and methods to induce reactions within a desired position have various potential applications. Here we demonstrate localized, efficient photopolymerization by radiation pressure. We induced a one-photon UV polymerization of liquid acrylate solutions in the optical-trapping potential of a focused near-IR (NIR) laser beam, leading to the confinement of solidification to a minute space with dimensions smaller or equal to one-fifth of the wavelength of the NIR laser. Our approach can produce solidification volumes smaller than those achievable with conventional one-photon polymerization, thus enabling the production of tiny polymeric structures that are smaller than the diffraction limit of the trapping light. This is the first demonstration of a radiation pressure effect on a photochemical reaction.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Reduced UV light scattering in PDMS microfluidic devices.

Microfluidic devices which consist of polydimethylsiloxane (PDMS) are used extensively for the production of polymer microparticles through the use of droplet templating and on-chip photopolymerization. However, in existing methods, spatial confinement of the photochemical droplet solidification is impaired by UV light scattering inside the PDMS elastomer. We present a technique to load PDMS mi...

متن کامل

Evaluation of the Heading Confinement Pressure Effect on Ground Settlement for EPBTBM Using Full 3D Numerical Analysis

Ground settlement is often the most serious concern when tunneling under an old city with numerous historic monuments. A successful engineering design under these conditions would require getting the most out of the ground strength parameters and avoiding any weakening maneuver throughout the operation. Knowing that surface settlement is highly affected by tunneling parameters in EPB shield tun...

متن کامل

Behavior Comparison of Uniaxial Cylindrical Columns Strengthened with CFRP

In recent years application of CFRP sheets in the strengthening of the concrete circular column has increased numerously. Knowing the exact behavior of concrete cylindrical columns confined with CFRP is of the first order of importance. ISIS Code of Canada has given relations for strength increase of circular columns confined with CFRP sheets, these relations are defined for a specified range o...

متن کامل

EVALUATION OF PRESSURE EFFECT ON HEAT TRANSFER COEFFICIENT AT THE METAL- MOLD INTERFACE FOR CASTING OF A356 AL ALLOY

Abstract: During solidification and casting in metallic molds, the heat flow is controlled by the thermal resistance at the casting-mold interface. Thus heat transfer coefficient at the metal- mold interface has a predominant effect on the rate of heat transfer. In some processes such as low pressure and die-casting, the effect of pressure on molten metal will affect the rate of heat transfer a...

متن کامل

Study of convergence confinement method curves considering pore-pressure effect

The design of underground spaces is mainly carried out using empirical, analytical, and numerical methods. The convergence confinement method (CCM) is an analytical technique that is widely utilized in analyzing the stability of underground spaces. However, the main challenge in the stability analysis is the selection of an accurate constitutive model for rock mass, and particularly, its post-f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the American Chemical Society

دوره 133 37  شماره 

صفحات  -

تاریخ انتشار 2011