A Nondestructive Electrical Method for Evaluating Mechanical Properties of Al-foam
نویسندگان
چکیده
Al alloy foams of composition Al-3wt.%Si-2%Cu-2%Mg was produced using powder metallurgical method. Mechanical properties of foams having different density were measured using uni-axial compression test and the measured properties such as elastic modulus and strength were compared with those of other existing commercial foams. The newly produced (Al-3%Si-2%Cu-2%Mg alloy) foams showed comparable strength and elastic modulus with other existing commercial foams. Electrical conductivity of the foams was measured. Mathematical relations were established between electrical conductivity and compressive properties of Al-foams with an aim to propose a nondestructive method for evaluation of mechanical properties of foams based on electrical conductivity. Curves obtained from derived relations fit very well with the experimental result.
منابع مشابه
Using the Ultrasonic Nondestructive Methods for Prediction of Mechanical Properties of AISI 4140 Alloy Steel
Achieving the mechanical properties of steels after various manufacturing and heat treatment processes is significant and essential. In production lines, after producing the specific and standard samples, mechanical properties have been measured by destructive processes which cause waste of cost and time. In addition, destructive techniques cannot detect the miniscule changes made in mechanical...
متن کاملCOMPARISON OF MECHANICAL AND ELECTRICAL PROPERTIES OF PIEZOELECTRIC COMPOSITES PZT/ZnO AND PZT/Al FABRICATED BY POWDER METALLURGY
Lead zirconate titanate (PZT) as a piezoelectric ceramic has been used widely in the fields of electronics, biomedical engineering, mechatronics and thermoelectric. Although, the electrical properties of PZT ceramics is a major considerable, but the mechanical properties such as fracture strength and toughness should be improved for many applications. In this study, lead monoxide, zirconium ...
متن کاملInfluence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam
In this article, the effects of different foam production times and temperatures on the mechanical, physical, and structural properties of polypropylene (PP) foam has been investigated. The microcellular PP foams were carried out using supercritical carbon dioxide (sc-CO2) as a physical foaming agent in a batch process. The samples were placed in a pressure vessel and were saturated ...
متن کاملElectro-Thermo-Mechanical Vibration Analysis of a Foam-Core Smart Composite Cylindrical Shell Containing Fluid
In this study, free vibration of a foam-core orthotropic smart composite cylindrical shell (SCCS) filled with a non-viscous compressible fluid, subjected to combined electro-thermo-mechanical loads is investigated. Piezoelectric polymeric cylindrical shell, is made from polyvinylidene fluoride (PVDF) and reinforced by armchair double walled boron nitride nanotubes (DWBNNTs). Characteristics of...
متن کاملAssessing the flexural strength changes in decayed wood of Iranian beech (Fagus orientalis) by using of nondestructive stress wave method
The aim of this study was to evaluate sound and decayed wood of Iranianbeech (Fagus orientalis) with a nondestructive stress wave method. Wood samples,with dimensions of 9 by 19 by 200 mm were decayed in laboratory soil-bed tests,based on European pre-standard ENV-807. The decay was evaluated by measuringbending dynamic modulus of elasticity (MOEd) and longitudinal dynamicmodulus of elasticity ...
متن کامل