Influence of three different preservative techniques on the mechanical properties of the ovine cortical bone.
نویسندگان
چکیده
PURPOSE Preservative treatments are necessary for disinfection and long term storage when dealing with biological tissue. Freezing is a gold standard but infectious risk can only be eliminated by using chemical fluids that may alter the mechanical properties, depending on their composition. Therefore, we experimentally evaluated the influence of freezing and of two commonly used preservative fluids (formalin and alcohol) on the intrinsic mechanical properties of ovine cortical bone samples, compared to purely fresh samples. METHODS Prismatic specimens were prepared from the sheep's metacarpal bones and were divided into four groups (fresh, fresh-frozen, formalin and alcohol). All samples underwent four-point-bending; fresh samples were tested immediately, preserved samples were tested after 14 days. Bending modulus, bending strength, yield strength and energy absorption for the elastic and plastic region were determined. RESULTS Significant differences were found for the plastic energy absorption for formalin (-41%) and alcohol (+37%) preservation com- pared to fresh samples. Formalin preservation revealed embrittlement of the cortical bone samples and alcohol preservation revealed higher ability of plastic energy absorption. CONCLUSIONS Our results indicate that freezing has no influence on the mechanical properties of the ovine cortical bone. Preservation with chemical fluids (formalin and alcohol) showed no influence on the elastic properties but it was observed for the ability of plastic energy absorption. Therefore, these methods seem to be suitable for preservation without evident altering of the elastic mechanical properties.
منابع مشابه
Study on Synthesis and Characterization of Unsaturated Poly (ester-amide) as Bone Fixation Materials
A new type of unsaturated poly ester-amide was prepared by melt polycondensation and characterized completely. Influence of heat treatment conditions and cross-linking content on mechanical and degradation properties of unsaturated polyester-amide were studied. Results suggested that the newly synthesized unsaturated poly(ester-amide) possessed good heat stabilization properties. Mechanical...
متن کاملThe Influence of Heat-Input on Structural and Mechanical Properties of 2205 Duplex Stainless Steel
The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...
متن کاملThe Influence of Heat-Input on Structural and Mechanical Properties of 2205 Duplex Stainless Steel
The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...
متن کاملThread Pitch Variant in Orthodontic Mini-screws: A 3-D Finite Element Analysis
Orthodontic miniscrews are widely used as temporary anchorage devices to facilitate orthodontic movements. Miniscrew loosening is a common problem, which usually occurs during the first two weeks of treatment. Macrodesign can affect the stability of a miniscrew by changing its diameter, length, thread pitch, thread shape, tapering angle and so on. In this study, a 3-D finite element analysis wa...
متن کاملDetermination of Relationships between the Ultrasound Velocity and the Physical Properties of Bovine Cortical Bone Femur
Accurate measurements of physical characteristics of bone are essential for diagnosis, assessment of change following treatment, and therefore, indirectly, for evaluation of new forms of therapy. This is particularly true of osteoporosis and aging skeleton, in which fractures occur easily. Methods: In this study an ultrasonic system was set-up and calibrated on Plexiglas tubes of variable thick...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Acta of bioengineering and biomechanics
دوره 17 1 شماره
صفحات -
تاریخ انتشار 2015