Implementation of the Trigonometric LMS Algorithm using Original Cordic Rotation

The LMS algorithm is one of the most successful adaptive filtering algorithms. It uses the instantaneous value of the square of the error signal as an estimate of the mean-square error (MSE). The LMS algorithm changes (adapts) the filter tap weights so that the error signal is minimized in the mean square sense. In Trigonometric LMS (TLMS) and Hyperbolic LMS (HLMS), two new versions of LMS algorithms, same formulations are performed as in the LMS algorithm with the exception that filter tap weights are now expressed using trigonometric and hyperbolic formulations, in cases for TLMS and HLMS respectively. Hence appears the CORDIC algorithm as it can efficiently perform trigonometric, hyperbolic, linear and logarithmic functions. While hardware-efficient algorithms often exist, the dominance of the software systems has kept those algorithms out of the spotlight. Among these hardwareefficient algorithms, CORDIC is an iterative solution for trigonometric and other transcendental functions. Former researches worked on CORDIC algorithm to observe the convergence behavior of Trigonometric LMS (TLMS) algorithm and obtained a satisfactory result in the context of convergence performance of TLMS algorithm. But previous researches directly used the CORDIC block output in their simulation ignoring the internal step-by-step rotations of the CORDIC processor. This gives rise to a need for verification of the convergence performance of the TLMS algorithm to investigate if it actually performs satisfactorily if implemented with step-by-step CORDIC rotation. This research work has done this job. It focuses on the internal operations of the CORDIC hardware, implements the Trigonometric LMS (TLMS) and Hyperbolic LMS (HLMS) algorithms using actual CORDIC rotations. The obtained simulation results are highly satisfactory and also it shows that convergence behavior of HLMS is much better than TLMS.