Synthesis of Transesterified Palm Olein-Based Polyol and Rigid Polyurethanes from this Polyol
نویسندگان
چکیده
Transesterification of palm olein with glycerol can increase the functionality by introducing additional hydroxyl groups to the triglyceride structure, an advantage compared to using palm olein directly as feedstock for producing palm-based polyol. The objective of this study was to synthesize transesterified palm olein-based polyol via a three-step reaction: (1) transesterification of palm olein, (2) epoxidation and (3) epoxide ring opening. Transesterification of palm olein yielded approximately 78 % monoglyceride and has an hydroxyl value of approximately 164 mg KOH g-1. The effect of formic acid and hydrogen peroxide concentrations on the epoxidation reaction was studied. The relationships between epoxide ring-opening reaction time and residual oxirane oxygen content and hydroxyl value were monitored. The synthesized transesterified palm olein-based polyol has hydroxyl value between 300 and 330 mg KOH g-1 and average molecular weight between 1,000 and 1,100 Da. On the basis of the hydroxyl value and average molecular weight of the polyol, the transesterified palm olein-based polyol is suitable for producing rigid polyurethane foam, which can be designed to exhibit desirable properties. Rigid polyurethane foams were synthesized by substituting a portion of petroleum-based polyol with the transesterified palm olein-based polyol. It was observed that by increasing the amount of transesterified palm olein-based polyol, the core density and compressive strength were reduced but at the same time the insulation properties of the rigid polyurethane foam were improved.
منابع مشابه
Structure-property studies of thermoplastic and thermosetting polyurethanes using palm and soya oils-based polyols.
Palm and soya oils were converted to monoglycerides via transesterification of triglycerides with glycerol by one step process to produce renewable polyols. Thermoplastic polyurethanes (TPPUs) were prepared from the reaction of the monoglycerides which act as polyol with 4,4'-methylenediphenyldiisocyanate (MDI) whereas, thermosetting polyurethanes (TSPUs) were prepared from the reaction of glyc...
متن کاملPolyol from castor oil and epoxy resin for PU Coatings
Novel reactive polyols were synthesized via modification of castor oil, a renewable agricultural raw material with epoxy resin and triethylamine as a catalyst. This polyol was used for synthesis of polyurethane coating. Coating formulations were developed by reacting polyol with aromatic adduct, aliphatic adduct and castor oil based adduct in different NCO/OH ratio. All coating composition syst...
متن کاملSynthesis of New Bio-Based Solid Polymer Electrolyte Polyurethane-LiClO4 via Prepolymerization Method: Effect of NCO/OH Ratio on Their Chemical, Thermal Properties and Ionic Conductivity
Novel bio-based polymer electrolyte was synthesized with LiClO4 as the main source of charge carrier. Initially, polyurethane-LiClO4 polymer electrolytes were synthesized via prepolymerization method with different NCO/OH ratios and labelled them as PU1, PU2, PU3 and PU4. Fourier transform infrared (FTIR) analysis indicates the co-ordination between Li ion and polyurethane in PU1. Differential ...
متن کاملEnzymatic transesterification of palm stearin and olein blends to produce zero-trans margarine fat
BACKGROUND Food industries aim to replace trans fat in their products by formulations having equivalent functionality and economic viability. Enzymatic transesterification can be a technological option to produce trans free fats targeting commercial applications. RESULTS Palm stearin and palm olein blends in different ratios were enzymatically transesterified in a solvent free system using a ...
متن کامل