Delamination Analysis of Carbon Fibre Reinforced Laminates: Evaluation of a Special Step Drill
نویسندگان
چکیده
Drilling of carbon fibre/epoxy laminates is usually carried out using standard drills. However, it is necessary to adapt the processes and/or tooling as the risk of delamination, or other damages, is high. These problems can affect mechanical properties of produced parts, therefore, lower reliability. Production of higher quality holes is a challenge to everyone related with composites industry. In this paper, four different drills three commercial and a special step (prototype) are compared in terms of thrust force during drilling and delamination. In order to evaluate damage, enhanced radiography is applied. The resulting images were then computational processed using a previously developed image processing and analysis platform. Results show that the prototype drill had encouraging results in terms of maximum thrust force and delamination reduction. Furthermore, it is
منابع مشابه
Damage Evaluation of Drilled Carbon/epoxy Laminates Based on Area Assessment Methods
The characteristics of carbon fibre reinforced laminates had widened their use, from aerospace to domestic appliances. A common characteristic is the need of drilling for assembly purposes. It is known that a drilling process that reduces the drill thrust force can decrease the risk of delamination. In this work, delamination assessment methods based on radiographic data are compared and correl...
متن کاملTool Effects on Hybrid Laminates Drilling
Fibre reinforced plastics are increasing their importance as one of the most interesting groups of material on account of their low weight, high strength and stiffness. To obtain good quality holes, it is important to identify the type of material, ply stacking sequence and fibre orientation. In this paper, the drilling of quasi-isotropic hybrid carbon+glass/epoxy plates is analyzed. Two commer...
متن کاملDrilling of carbon fibre reinforced laminates – a comparative analysis of five different drills on thrust force, roughness and delamination
The distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in the increase of their use during the last decades. Although parts are normally produced to “near-net” shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most...
متن کاملDrilling of carbon fibre reinforced laminates – a study
The distinguishing characteristics of carbon fibre reinforced laminates, like low weight, high strength or stiffness, had resulted in an increase of their use during the last decades. Although parts are normally produced to “near-net” shape, machining operations like drilling are still needed. In result of composites non-homogeneity, this operation can lead to delamination, considered the most ...
متن کاملDrilling Process of Composite Laminates – a Tool Based Analysis
The distinctive characteristics of carbon fibre reinforced plastics, like low weight or high specific strength, had broadened their use to new fields. In order to join different components by using bolts, rivets or screws, one of the machining operations needed in composite structures is drilling. Usually, it is accepted that drilling can be carried out using conventional tools and machinery wi...
متن کامل