Transient Phenomena
نویسنده
چکیده
The SKA's design is driven by the needs of cutting-edge radio astronomy for sensitivity and spacial resolution. However its design is also driven by the desire to explore the transient radio Universe. In addition to pulsars, the SKA will be able to carry out high time resolution observations of several classes of known and predicted transient sources. Here we consider a selection of them, and describe how observational demands affect the instrument's design.
منابع مشابه
Computational Simulation of Ablation Phenomena in Glass-filled Phenolic Composites
A one–dimensional, transient and thermal degradation model for predicting responses of composite materials when are exposed to the fire is presented. The presented model simulates ablation of composites with different layers of materials and considers material properties as functions of temperature. The reactions are modeled by using Arrhenius-type parameters and density-temperature diagram...
متن کاملKINETIC STUDY OF TRR CORE IN FUEL CONVERSION FROM HEU TO LEU
In the conversion of fuel in the Tehran Research Reactor core from Highly- Enriched Uraniutn to Low-Enriched Uranium fuel neutronics analysis, thermal hydraulic calculations and kinetic performance of the core have to be studied. In this study, static and dynamic core performance for HEU and LEU fuels were investigated. In static conditions, two groups of neutron flux distributions in axia...
متن کاملAn experimental assessment of nanostructured materials embedded in a PCM-based heat sink for transient thermal management of electronic
In the present paper, an experimental assessment was performed on the transient thermal performance of a heat sink filled by a phase change material (PCM) and PCM embedded with carbon nanofibers (CNFs) and titania (TiO2) nanoparticles as nanostructured materials. In order to enhance the thermal conductivity of PCM, CNFs and TiO2 nanoparticles at different loadings (0.5wt. % and 2 wt.% of CNFs a...
متن کاملTHREE DIMENSIONAL MODELING OF TURBULENT FLOW WITH FREE SURFACE IN MOLD FILLING
In the present study a Finite Difference Method has been developed to model the transient incompressible turbulent free surface fluid flow. A single fluid has been selected for modeling of mold filling and The SOLA VOF 3D technique was modified to increase the accuracy of simulation of filling phenomena for shape castings. For modeling the turbulence phenomena k-e standard model was used. In or...
متن کاملTransient Fluid-Flow Phenomena in the Continuous Steel-Slab Casting Mold and Defect Formation
Phenomena associated with the turbulent flow of molten steel in a continuous casting mold are responsible for many defects in the final product, including surface slivers, frozen meniscus hooks, captured inclusions that enter the mold from upstream, and mold slag entrapment. Animations of some of these transient flow phenomena are presented from Large-Eddy Simulations of a typical slab caster w...
متن کاملTransient Phenomena in Electromagnetic Forming Processes
The paper deals with finite element model for analysis of electromagnetic forming process of thin metallic sheets. The investigation starts with the FLUX simulation of transient electromagnetic field phenomena, continues with a transient structural analysis using ANSYS Structural under loads previously evaluated and ends with an ANSYS Multiphysics fully coupled analysis. The paper emphasizes th...
متن کامل