Problems in Welding of High Strength Aluminium Alloys

نویسنده

  • Wei Zhou
چکیده

The 7XXX series alloys are heat-treatable Al-Zn-Mg or Al-Zn-Mg-Cu alloys. They develop their strength by solution heat treatment followed by ageing. In contrast to the 5XXX series alloys, the 7XXX series alloys do not respond favourably to cold work, because they are strengthened almost exclusively by GP zone formation and precipitates which nucleate from the GP zones. Introducing many new dislocations by cold work after solution treatment and quenching does not greatly accelerate formation of precipitates.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Laser welding of dissimilar aluminium alloys with filler material

Laser welding of dissimilar aluminium alloys with filler material Luís Filipe Amaro Pinto Instituto Superior Técnico – Technical University of Lisbon – Portugal September 2008 Abstract The aluminium alloys are materials with great potential because of its high strength and low weight. However, the welding of dissimilar aluminium alloys is difficult in autogeneous welding, due to these alloys ar...

متن کامل

Optimization of process parameters during Friction Stir Welding of Aluminium 5083 & 6082 Alloys

The paper deals with the optimization of welding parameters of friction stir welding of different Aluminium alloy groups. For this purpose 5 series Aluminium alloy Al 5083 and 6 series Aluminium alloy Al 6062 were taken .Tensile Strength test and micro structure analysis under various rotating speeds and tool profiles is conducted. It is observed that the increase in tool rotation speed and the...

متن کامل

Processability of high strength Aluminium-Copper alloys AW-2022 and 2024 by Laser Beam Melting in Powder Bed

Additive Manufacturing offers geometric freedom excellently suited for topology optimized light weight designs. Ideally these should be produced from materials of high strength to weight ratio such as aluminium-copper alloys. Yet these are considered unsuitable for welding. With Laser Beam Melting of Metals in powder bed (LBM), the only class of aluminium alloys widely processed is that of alum...

متن کامل

Microstructure and mechanical characteristics of dissimilar aluminium alloy joining employing gas tungsten arc welding

Despite the increased use of aluminium alloys in several industries, their common concern is the difficulty of joining dissimilar alloys using welding techniques. Based on this, the primary purpose of this research is to assess the mechanical characteristics of dissimilar joining of heat-treatable 6061 and non-heat-treatable 5083 aluminium alloys by gas tungsten arc welding and to discover the ...

متن کامل

Effect of Heat Input on Tensile Properties of Friction Stir Welded AA6061-T6 and AA7075-T6 Dissimilar Aluminum Alloy Joints

Friction Stir Welding (FSW) is a solid state process widely used to join dissimilar aluminium alloys. High quality and strength joints can be fabricated using this technique when compared to other conventional methods. The welding parameters play major role in determining the quality of the weld. This paper aims in presenting the effect of heat input on tensile properties of the joints between ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003