Characterisation and optimisation of PECVD SiNx as an antireflection coating and passivation layer for silicon solar cells
نویسندگان
چکیده
Related Articles Growth and band alignment of Bi2Se3 topological insulator on H-terminated Si(111) van der Waals surface Appl. Phys. Lett. 102, 074106 (2013) Effect of microwave plasma treatment on silicon dioxide films grown by atomic layer deposition at low temperature J. Appl. Phys. 113, 064102 (2013) Strain engineering in epitaxial La1−xSr1+xMnO4 thin films J. Appl. Phys. 113, 053906 (2013) Synthesis and characterization of MoS2/Ti composite coatings on Ti6Al4V prepared by laser cladding AIP Advances 3, 022106 (2013) Molecular beam epitaxy of high structural quality Bi2Se3 on lattice matched InP(111) substrates Appl. Phys. Lett. 102, 041914 (2013)
منابع مشابه
Black Multicrystalline Solar Modules Using Novel Multilayer Antireflection Stacks
Today multiand monocrystaline solar cells are typically wet-chemically textured and coated with a thin layer of silicon nitride to reduce losses due to light reflection and for electrical passivation of the silicon surface. In this paper we investigate a layer stack consisting of silicon nitride (SiNx:H) with a high refractive index at the silicon interface, an intermediate SiNx:H layer and on ...
متن کاملStability of SiNX/SiNX double stack antireflection coating for single crystalline silicon solar cells
Double stack antireflection coatings have significant advantages over single-layer antireflection coatings due to their broad-range coverage of the solar spectrum. A solar cell with 60-nm/20-nm SiNX:H double stack coatings has 17.8% efficiency, while that with a 80-nm SiNX:H single coating has 17.2% efficiency. The improvement of the efficiency is due to the effect of better passivation and bet...
متن کاملComparative simulation study between n- type and p- type Silicon Solar Cells and the variation of efficiency of n- type Solar Cell by the application of passivation layer with different thickness using AFORS HET and PC1D
In this paper, comparative study of p type and n type solar cells are described using two popular solar cell analyzing software AFORS HET and PC1D. We use SiNx layer as Antireflection Coating and a passivated layer Al2O3 .The variation of reflection, absorption, I-V characteristics, and internal and external quantum efficiency have been done by changing the thickness of passivated layer and ARC...
متن کاملComparison of Front and Back Surface Passivation Schemes for Silicon Solar Cells
This work presents a comprehensive study on fast, low-cost methods for the electronic passivation of the phosphorus-diffused front surface and the non-diffused l'-type rear surface of crystalline Si solar cells. Titanium dioxide is compared with rapidly-grown thermal oxide (RTO) and PECVD silicon nitrides from three different laboratories. Double layers of RTO and Ti02 or SiN are also investiga...
متن کاملInkjet Printing of Isolation Layers for Back-Contacted Silicon-Heterojunction Solar Cells
For wafer based silicon solar cells, the combination of amorphous/crystalline silicon (a-Si:H/c-Si) heterojunction emitters (SHJ) [1] and back-contacted back-junction solar cell concepts (BCBJ) [2] offer a very high efficiency potential of around 24%. Stangl et al. proposed a relatively simple and therefore attractive cell concept comprising a two level metallization isolated by an insulation l...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013