Low-frequency ac measurement of the Seebeck coefficient
نویسندگان
چکیده
We have analyzed the sources of error in the measurement of the Seebeck coefficient and designed a low frequency ac method to reduce them. This method has high precision in a short time period compared to commonly used dc methods while it minimizes some major sources of error that other ac methods do not. Furthermore, the setup can be fit into a 3 mm diam 3 7 mm Teflon pressure cell and has minimal side effects due to the heat conductance of the pressure medium. We have also proposed and tested several methods to calibrate the Seebeck coefficient of thermocouples under pressure. © 2001 American Institute of Physics. @DOI: 10.1063/1.1406930#
منابع مشابه
Protocols for the high temperature measurement of the Seebeck coefficient in thermoelectric materials
In Seebeck coefficient metrology, the present diversity in apparatus design, acquisition methodology and contact geometry has resulted in conflicting materials data that complicate the interlaboratory confirmation of reported high efficiency thermoelectric materials. To elucidate the influence of these factors in the measurement of the Seebeck coefficient at high temperature and to identify opt...
متن کاملThermoelectric and Transport Properties of Delafossite CuCrO2:Mg Thin Films Prepared by RF Magnetron Sputtering
P-type Mg doped CuCrO₂ thin films have been deposited on fused silica substrates by Radio-Frequency (RF) magnetron sputtering. The as-deposited CuCrO₂:Mg thin films have been annealed at different temperatures (from 450 to 650 °C) under primary vacuum to obtain the delafossite phase. The annealed samples exhibit 3R delafossite structure. Electrical conductivity σ and Seebeck coefficient S of al...
متن کاملComputational Seebeck Coefficient Measurement Simulations
We have employed finite element analysis to develop computational Seebeck coefficient metrology simulations. This approach enables a unique exploration of multiple probe arrangements and measurement techniques within the same temporal domain. To demonstrate the usefulness of this approach, we have performed these Seebeck coefficient measurement simulations to quantitatively explore perturbation...
متن کاملMultifunctional probes for high-throughput measurement of Seebeck coefficient and electrical conductivity at room temperature.
An apparatus capable of rapid measurement of the Seebeck coefficient and electrical resistivity at room temperature is reported. The novel aspect of this apparatus is the use of 4 multifunctional probes that comprise a junction of two conductors at the tip and serve as both thermocouples and electrical contacts. In addition, one of the probes has a built-in heater that can establish a temperatu...
متن کاملPage 1 Measurement of Seebeck coefficient perpendicular to SiGe superlattice
Seebeck coefficient is one of the key parameters to evaluate the performance of thermoelectric coolers. However, it is very difficult to directly measure Seebeck coefficient perpendicular to thin film devices because of the difficulty of creating a temperature gradient and measuring localized temperature and voltage change simultaneously. In this paper, a novel method is described and it is use...
متن کامل