Influence of inertial and thermal effects on the dynamic growth of voids in porous ductile materials
نویسندگان
چکیده
The influence of inertial, thermal and rate sensitive effects on the void growth at high strain rate in a thermal viscoplastic solid is investigated by means of a theoretical model presented in the present paper. Numerical analysis of the model suggests that inertial, thermal and rate sensitive effects are three major factors which greatly influence the behavior of void growth in the high strain rate case. Comparison of the mathematical model proposed in the present work and Johnson's model shows that if the temperature dependence is considered, material viscosity TJ can take the experimentally measured values.
منابع مشابه
Nonlinear Dynamic Response of Functionally Graded Porous Plates on Elastic Foundation Subjected to Thermal and Mechanical Loads
In this paper, the first-order shear deformation theory is used to derive theoretical formulations illustrating the nonlinear dynamic response of functionally graded porous plates under thermal and mechanical loadings supported by Pasternak’s model of the elastic foundation. Two types of porosity including evenly distributed porosities (Porosity-I) and unevenly distributed porosities (Porosity-...
متن کاملStudy of the Effects of Various Boundary Conditions on the Acoustical Treatments of Double-Panel Structures Lined with Poroelatic Materials
In this paper, the acoustical treatment of double-panel structures lined with poroelatic materials is predicted using analytical method in order to study the effective usage of the various boundary conditions of porous layer and to identify the effective parameters on the transmission loss of the multilayer systems. Therefore, inertia and viscous coupling along with thermal and elastic coupling...
متن کاملFlow Over an Exponentially Stretching Porous Sheet with Cross-diffusion Effects and Convective Thermal Conditions
This article investigates the influence of cross-diffusion on the viscous fluid flow over a porous sheet stretching exponentially by applying the convective thermal conditions. Velocity slip at the boundary is considered. The numerical solutions to the governing equations are evaluated using successive linearisation procedure and Chebyshev collocation method. It is observed from this study that...
متن کاملEffects of thermal diffusion and chemical reaction on MHD transient free convection flow past a porous vertical plate with radiation, temperature gradient dependent heat source in slip flow regime
An analytical investigation is conducted to study the unsteady free convection heat and mass transfer flow through a non-homogeneous porous medium with variable permeability bounded by an infinite porous vertical plate in slip flow regime while taking into account the thermal radiation, chemical reaction, the Soret number, and temperature gradient dependent heat source. The flow is considered u...
متن کاملGraphite Phase Formation in Al Alloyed Ductile Irons
The influence of aluminum, within the range of 0.08 - 6.16 wt.%, on the microstructure and hardness of as-cast ductile cast iron has been studied. A number of irons of different composition have been made by green sand casting and gravity die casting of appropriate design to provide the experimental materials. It has been found that Al addition and higher cooling rates in permanent mould castin...
متن کامل