Ultralow-loss silicon waveguide crossing using Bloch modes in index-engineered cascaded multimode-interference couplers.

نویسندگان

  • Yang Zhang
  • Amir Hosseini
  • Xiaochuan Xu
  • David Kwong
  • Ray T Chen
چکیده

We investigate the loss mechanism in three-moded multimode-interference couplers that are the building blocks of a compact and low-loss waveguide crossing structure. Broadband silicon waveguide crossing arrays with <0.01  dB insertion loss per crossing are proposed using cascaded multimode-interference couplers, where lateral subwavelength nanostructures are used to reduce the insertions loss. We design and fabricate a 101×101 waveguide crossing array with a pitch of 3.08 μm. Insertion loss of ∼0.02  dB per crossing and crosstalk <-40  dB at 1550 nm operating wavelength and a broad transmission spectrum ranging from 1520 to 1610 nm are experimentally demonstrated.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultra-low-loss CMOS-compatible waveguide crossing arrays based on multimode Bloch waves and imaginary coupling.

We experimentally demonstrate broadband waveguide crossing arrays showing ultralow loss of 0.0 4dB/crossing (0.9%) on average and converging to 0.033 dB/crossing (0.075%) matching theory and cross-talk suppression over 35 dB in a CMOS-compatible geometry. The principle of operation is the tailored excitation of a low-loss spatial Bloch wave formed by matching the periodicity of the crossing arr...

متن کامل

Optimum access waveguide width for 1 x N multimode interference couplers on silicon nanomembrane.

We derived an analytical formula for the optimum width of the access waveguides of 1 x N multimode interference (MMI) couplers. Eigenmode-decomposition-based simulations show that the optimum width relation corresponds to the points of diminishing returns in both insertion loss and output uniformity versus access waveguide width. We fabricate and characterize 1 x 12 MMI couplers on a nanomembra...

متن کامل

1 3 12 even fanout using multimode interference optical beam

Introduction: Efficient optical beam splitters are a key component in photonic integrated circuits (PICs). Multimode interference (MMI) couplers have the advantages of compact size, low loss, stable splitting ratio, large optical bandwidth, and good fabrication tolerances [1, 2]. One of the major applications of MMI couplers is power splitters. To date, high performance in output uniformity is ...

متن کامل

Taper-integrated multimode-interference based crossings for silicon wire waveguides

Novel multimode-interference (MMI)-based crossings integrated with miniaturized tapers are numerically presented for Silicon wire waveguides. These miniature tapers function as field expanders to reduce transition loss between the input/output waveguide and the MMI region and the crosstalk in the crossing section. As a consequence, the lengths of MMI sections reduce to less than twice of the be...

متن کامل

Design of a High Index Waveguide Grating

Arrayed waveguide gratings (AWGs) are useful structures for the implementation of wavelength division multiplexing. The AWG consists of an input splitter, a dispersive waveguide array which creates the wavelength demultiplexing and multiplexing effects, and an output coupler. Because the dispersive waveguide array consists of bent waveguides, the size of an AWG is limited by the light loss in t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics letters

دوره 38 18  شماره 

صفحات  -

تاریخ انتشار 2013