An industry-wide pulmonary study of men and women manufacturing refractory ceramic fibers.
نویسندگان
چکیده
An industry-wide pulmonary morbidity study was undertaken to evaluate the respiratory health of employees manufacturing refractory ceramic fibers at five US sites between 1987 and 1989. Refractory ceramic fibers are man-made vitreous fibers used for high temperature insulation. Of the 753 eligible current employees, 742 provided occupational histories and also completed the American Thoracic Society respiratory symptom questionnaire; 736 also performed pulmonary function tests. Exposure to refractory ceramic fibers was characterized by classifying workers as production or nonproduction employees and calculating the duration of time spent in production employment. The risk of working in the production of refractory ceramic fibers and having one or more respiratory symptoms was estimated by adjusted odds ratios and found to be 2.9 (95 percent confidence interval 1.4-6.2) for men and 2.4 (95 percent confidence interval 1.1-5.3) for women. The effect of exposure to refractory ceramic fibers on forced vital capacity (FVC), forced expiratory volume in 1 second (FEV1), the ratio of the two (FEV1/FVC), and forced expiratory flow (liters/second) between 25 percent and 75 percent of the FVC curve (FEF(25-75)) was evaluated by multiple regression analysis using transformed values adjusted for height, by dividing by the square of each individual's height. For men, there was a significant decline in FVC for current and past smokers of 165.4 ml (p < 0.01) and 155.5 ml (p = 0.04), respectively, per 10 years of work in the production of refractory ceramic fibers. For FEV1, the decline was significant (p < 0.01) only for current smokers at 134.9 ml. For women, the decline was greater and significant for FVC among nonsmokers, who showed a decrease of 350.3 ml (p = 0.05) per 10 years of employment in the production of refractory ceramic fibers. These findings indicate that there may be important sex differences in response to occupational and/or environmental exposure.
منابع مشابه
Natural radioactivity concentration in raw materials used for manufacturing refractory products
Background: Some Particular areas contain natural radionuclide at levels much higher than those usually present in earth's crust. The radiological impact of the use of zirconium ore in zirconium industry is due to internal exposure of the lung by alpha particles and external exposure of the body by the gamma rays. The result of gamma spectrometry measurement of the concentrations of th...
متن کاملBiopersistence of man-made vitreous silicate fibers in the human lung.
There is now a substantial body of experimental data on the pulmonary biopersistence of man-made vitreous silicate fibers (MMVSF), but human data are seriously lacking. Our knowledge in this field is essentially limited to a few reports of measurements of fibers retained in lung tissue samples taken at autopsy from workers manufacturing these products. Three types of exposure were studied: fibr...
متن کاملA longitudinal study of chest radiographic changes of workers in the refractory ceramic fiber industry.
STUDY OBJECTIVE This industry-wide longitudinal study examines chest radiographic changes of workers manufacturing refractory ceramic fibers (RCF). DESIGN Chest radiographs were obtained every 3 years and were interpreted using the 1980 International Labour Organization classification for pneumoconiosis. Three exposure metrics were calculated: duration and latency in a production job, and cum...
متن کاملRetention modeling of refractory ceramic fibers (RCF) in humans.
A mathematical retention model has been developed to predict the lung burden and size distribution of kaolin refractory ceramic fibers (RCF) in the pulmonary region of the human lung during exposure. Fiber dissolution, breakage, and differential clearance are considered in this model; rates for these processes are obtained by extrapolation from available data on laboratory rats. The lung burden...
متن کاملPulmonary effects of exposure to synthetic fibers: A case study in a textile industry in Iran
Background & Aims of the Study: Industries continue to develop and use of various types of manmade fibers nowadays. Acrylic fiber is one of the most important synthetic fibers that use in industries. Based on this fact that, little information exists about workplaces exposure to acrylic fibers, purpose of this study is to determine so this study has been done for evaluation of the pulmonary eff...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- American journal of epidemiology
دوره 148 9 شماره
صفحات -
تاریخ انتشار 1998