Colour Stability of Veneering Composites after Accelerated Aging

OBJECTIVES To investigate the colour stability of four indirect composite restorative materials after accelerated aging. METHODS Four indirect composites (Gradia, Signum+, HFO and Adoro) were used. For each material, six specimens were prepared and subjected to accelerated aging (Suntest CPS+, Atlas, Chicago, IL, USA) according to ISO 7491. A Dr. Lange Microcolor Data Station colorimeter (Braive Instruments, Liege, Belgium) was used to measure specimen colour before and after aging. Measurements were performed according to the CIE L*a*b* system, and the mean L*, a* and b* values for each material were calculated. The equation DeltaE = [(DeltaL*)2 + (Deltaa*)2 + (Deltab*)2](1/2) was used to measure the total colour change (DeltaE), where DeltaL*, Deltaa* and Deltab* are the differences in the respective values before and after aging. One-way ANOVA were used to determine statistically significant differences in DeltaL*, Deltaa*, Deltab* and DeltaE. RESULTS No statistically significant differences were found in DeltaL*, Deltaa*, Deltab* and DeltaE among the materials tested (PDeltaL*=.063; PDeltaa*=.521; PDeltab*=.984 and PDeltaE=.408). After aging, Gradia specimens showed an increase in lightness (DeltaL*=0.36) and a green-yellow shift (Deltaa*=-1.18, Deltab*=0.6), while Signum+ specimens exhibited an increase in lightness (DeltaL*=0.5) and a green-blue shift (Deltaa*=-0.9, Deltab*=-0.45). HFO specimens exhibited an increase in lightness (DeltaL*=0.75) and a green-yellow shift (Deltaa*=-1.3, Deltab*=0.06), and Adoro specimens exhibited an increase in lightness (DeltaL*=2.07) and a green-yellow shift (Deltaa*=-1.3, Deltab*=0.68). CONCLUSIONS Colour changes were found to be within accepted values of perceptibility and clinical acceptance after accelerated aging, and no statistically significant differences were found in DeltaL*, Deltaa*, Deltab* and DeltaE among the materials tested.