In vivo analysis of post space sealing with different adhesive materials.
نویسندگان
چکیده
This in vivo study analyzed the sealing ability of two adhesives in post spaces, cyanoacrylate (Super Bonder® - Henkel Loctite Adesivos Ltda., Itapevi, SP, Brazil) and ScotchbondTM Multi-Purpose (3M Dental Products, St. Paul, MN, USA), testing the hypothesis that their use would result in a decreased leakage through the remaining filling material. Forty extracted premolars (80 root canals) of dogs were used. The root canals were cleaned, shaped and filled by the lateral condensation technique using Sealer 26TM. The post space was created removing two thirds of the filling material within the root canal. The canals were randomly divided in three groups, which were treated as follows: Group A received the ScotchbondTM Multi-Purpose adhesive system; for Group B the cyanoacrylate adhesive, Super BonderTM, was employed; and no adhesive was applied into the post space for Group C (control group). A glass ionomer provisional restoration was placed allowing the sealer to set for 72 hours. Then the restoration was removed and the root canal was exposed to the oral environment for 45 days. The dogs were then killed and their jaws were removed. The post spaces were filled with India ink and the teeth were restored for 96 hours. Afterwards, the teeth were extracted and the roots were sectioned at the furcation for allocation to their specific groups. The teeth were turned transparent and the quantitative analysis of leakage was performed using light microscopy. The results showed no significant differences between groups, rejecting the initial hypothesis. Leakage occurred in a great extent in all specimens. Therefore, sealing post spaces with the adhesives used in this study was not an effective method to prevent microleakage.
منابع مشابه
Ex-vivo Sealing Ability of Different Thicknesses of White and Gray Angelus MTA as an Intra-orifice Barrier in Endodontically Treated Teeth
Introdouction: It is important for the clinician to be aware regarding the necessary thickness of materials used as intra-orifice coronal barriers to prevent microleakage. The purpose of this in vitro study was to compare coronal microleakage of three different thicknesses of white and gray Angelus mineral trioxide aggregate (WAMTA, GAMTA). Materials and methods: A total of 66 canals of extrac...
متن کاملThe Effect of Two Post-Space Preparation Techniques on the Seal of Resilon and Gutta-Percha Obturation Materials
INTRODUCTION The aim of this study was to compare the effect of post space preparation with Gates Glidden drills or hand files on the sealing ability of gutta-percha or Resilon obturation materials. MATERIALS AND METHODS One-hundred and four single-rooted human teeth were instrumented and divided into four experimental groups (n=21 each) and two groups of positive and negative control (n=10)....
متن کاملClinical comparison of flowable composite to other fissure sealing materials--a 12 months study.
The subject of the study was the clinical analysis of six different sealing materials over a 12-months period. It was necessary to prove the clinical success of sealing with flowable composite with the use of adhesive system and preventing effect of sealants on caries developement. Our study included children aged from 6 to 15, and we sealed 326 teeth with materials from the group of flowable c...
متن کاملبررسی قدرت نگهدارندگی چهار نوع چسب دندان مصنوعی در محیط آزمایشگاه
Background and Aim: One of the most important structural factors that facilitate patient’s acceptance of full denture, is adequate and appropriate retention. The objective of this study was to evaluate the retentive ability of four denture adhesives in vitro: Safe Saze-Gum Sealing-Denstet-Corega. Materials and Methods: This experimental study was conducted in vitro on the basis of measurement o...
متن کاملEvaluation of self-adhering composite microleakage compared with tow conventional adhesive systems
Background and Aims: The self-adhering composites were introduced to reduce the chair time and minimizing handling errors. They can be bonded micromechanically to the dental structure without the need for separate adhesive application. Since there is limited information about bonding performance of this type of composite, the aim of this study was to evaluate the microleakage of enamel and dent...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of applied oral science : revista FOB
دوره 11 3 شماره
صفحات -
تاریخ انتشار 2003