Properties of „Zn,Cr...Te semiconductor deposited at room temperature by magnetron sputtering
نویسندگان
چکیده
by magnetron sputtering W. G. Wang, K. J. Han, K. J. Yee, C. Ni, Q. Wen, H. W. Zhang, Y. Zhang, L. Shah, and John Q. Xiao Department of Physics and Astronomy, University of Delaware, Newark, Delaware 19716, USA Department of Physics, Chungnam National University, Daejeon 305-764, Republic of Korea Department of Materials Sciences, University of Delaware, Newark, Delaware 19716, USA University of Electronic Science and Technology of China, Chengdu, 610054, People’s Republic of China
منابع مشابه
A Study of the Tribological Properties of Sputter-deposited MoSX/Cr Coatings
In this investigation, MoSx/Cr coatings were deposited by direct-current magnetron sputter onto Ck45 (AISI 1045) plain carbon steel substrates. The MoSx/Cr ratio in the coatings was controlled by sputtering the composite targets. The chemical characterization was performed using EDX (energy dispersive X-ray analysis); the structural characterization was accomplished by X-ray diffraction (XRD) s...
متن کاملRoom-Temperature Deposition of DLC Films by an Ion Beam Method, Reactive Magnetron Sputtering and Pulsed Laser Deposition: Process Design, Film Structure and Film Properties
Structural and mechanical properties of diamond-like carbon films deposited by an anode layer source, Thin Solid Films 517 (2009) 6502. spectroscopy of diamond-like carbon films deposited by an anode layer source, Diamond Relat. Mater. 17 DLC films deposited at room-temperature by reactive magnetron sputtering and by an anode layer source – a comparative study, Relation between structural/topol...
متن کاملThe tribological properties of Cu-Ni3Al-MoS2 composite coating deposited by magnetron sputtering
In industrial applications, most materials are exposed to wear and friction because multiple conditions are used. However, the tribological properties of these materials can be improved with different techniques. One such technique that improves the frictional property of a surface is the use of self-lubricating coatings. In this study, multicomponent coatings of nominal composition Cu-Ni3Al-Mo...
متن کاملEffect of Thickness on Properties of Copper Thin Films Growth on Glass by DC Planar Magnetron Sputtering
Copper thin films with nano-scale structure have numerous applications in modern technology. In this work, Cu thin films with different thicknesses from 50–220 nm have been deposited on glass substrate by DC magnetron sputtering technique at room temperature in pure Ar gas. The sputtering time was considered in 4, 8, 12 and 16 min, respectively. The thickness effect on the structural, mo...
متن کاملMechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering
Crystalline tantalum thin films of about 500nm thickness were deposited on AISI 316L stainless steel substrate using magnetron sputtering. To investigate the nano-mechanical properties of tantalum films, deposition was performed at two temperatures (25°C and 200°C) on TaNx intermediate layer with different N2/Ar flow rate ratio from 0 to 30%. Nano-indentation was performed to obtain the mechani...
متن کامل