Performance Analysis and Designing 16 Bit Sram Memory Chip Using XILINX Tool
نویسنده
چکیده
Fast low power SRAMs are becoming the critical component of many VLSI chips. There is increasing divergence in the speed of the processors and the main memory, and the power dissipation is also increasing due to increase in the integration and the operating speed as well as increase in the battery powered devices. The SRAM helps in bridging the gap and also reducing the power dissipation [1]. After designing the memory, we will go for testing the fault in the memory.
منابع مشابه
Implementation of Sram Array by Using Multibit Flip-flop
Memory elements play a vital role on Digital World. In memory devices the most important factor is power consumption. Because the power consumption of the memory device increases means, the device reliability and life time is reduced. The basic memory elements of designer considerations are Latch and Flip-flop. In this paper we design SRAM using arrays of flip-flops and we analyze the design of...
متن کاملDesign of 1024*16 Cm8 Ultra Low Voltage Sram with Self Time Power Reduction Technique
Technology scaling has enabled us to integrate both memory and logic circuits on a single chip. However, the performance of embedded memory and especially SRAM (Static Random Access Memory) that is widely used in the industry as on the on-chip memory cache in ultra low voltage applications can adversely affect the speed and power efficiency of the overall system. This report discusses the desig...
متن کاملDesign and Verification of Low Power SRAM using 8T SRAM Cell Approach
SRAM cell stability will be a primary concern for future technologies due to variability and decreasing power supply voltages. Advances in chip designing have made possible the design of chips at high integration and fast performance. Lowering power consumption and increasing noise margin have become two central topics in every state of SRAM designs.The Conventional 6T SRAM cell is very much pr...
متن کاملEnergy Efficient Novel Design of Static Random Access Memory Memory Cell in Quantum-dot Cellular Automata Approach
This paper introduces a peculiar approach of designing Static Random Access Memory (SRAM) memory cell in Quantum-dot Cellular Automata (QCA) technique. The proposed design consists of one 3-input MG, one 5-input MG in addition to a (2×1) Multiplexer block utilizing the loop-based approach. The simulation results reveals the excellence of the proposed design. The proposed SRAM cell achieves 16% ...
متن کاملA Novel Quantum-Dot Cellular Automata X-bit × 32-bit SRAM
Application of quantum-dot cellular automata (QCA) technology as an alternative to CMOS technology on the nanoscale has a promising future; QCA is an interesting technology for building memory. The proposed design and simulation of a new memory cell structure based on QCA with a minimum delay, area, and complexity is presented to implement a static random access memory (SRAM). This paper presen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016