Componentality-based wall-blocking for RANS models
نویسندگان
چکیده
منابع مشابه
Hybrid RANS/LES computation of plane impinging jet flow
Flow characteristics are presented of simulation results of plane impinging jets at high nozzle-plate distances, with two k-ω based hybrid RANS/LES (Reynolds Averaged Navier–Stokes/Large–Eddy Simulation) models and a k-ω RANS model. The first hybrid RANS/LES model is obtained by substitution of the turbulent length scale by the local grid size in the destruction term of the turbulent kinetic en...
متن کاملA unified RANS-LES model: Computational development, accuracy and cost
5 Large eddy simulation (LES) is computationally extremely expensive for the investigation of wall-bounded turbulent flows at high Reynolds numbers. A way to reduce the computational cost of LES by orders of magnitude is to combine LES equations with Reynolds-averaged Navier-Stokes (RANS) equations used in the near-wall region. A large variety of such hybrid RANS-LES methods are currently in us...
متن کاملSteady-State Evaluation of 'Two-Equation' RANS (Reynolds-averaged Navier-Stokes) Turbulence Models for High-Reynolds Number Hydrodynamic Flow Simulations
This report presents an evaluation of the steady-state capability of the turbulence models available in the commercial CFD code FLUENT 6.0, for their application to the simulation of hydrofoil turbulent boundary layer separation at high-Reynolds numbers. Four widely applied two-equation RANS turbulence models were qualitatively and quantitatively assessed through comparison with high-quality ex...
متن کاملNumerical Simulation of Turbulent Subsonic Compressible Flow through Rectangular Microchannel
In this study, turbulent compressible gas flow in a rectangular micro-channel is numerically investigated. The gas flow assumed to be in the subsonic regime up to Mach number about 0.7. Five low and high Reynolds number RANS turbulence models are used for modeling the turbulent flow. Two types of mesh are generated depending on the employed turbulence model. The computations are performed for R...
متن کاملWall-modeled large eddy simulation in complex geometries with application to high-lift devices
In large eddy simulations (LES) of wall-bounded flows, the need to resolve energycarrying eddies in the vicinity of the wall leads to a prohibitive cost which prevents its use at very high Reynolds numbers. To overcome this limitation, many attempts have been made in the last two decades to model the unresolved scales near the wall. These works mainly focused on two different approaches: hybrid...
متن کامل