Numerical Analysis and Equivalent Circuit Modeling for Loss Quantification of Reflectarrays Using Different Substrate Materials
ثبت نشده
چکیده
Techniques for numerical analysis and equivalent circuit modeling for loss performance of reflectarray antennas are presented in this paper. Numerical equations are employed to find out the values of reflection loss at resonant frequency and a novel set of predictions is applied to acquire the reflection loss curve for different materials. Equivalent circuit modeling using lumped components has been developed representing the behavior of reflection loss for reflectarrays designed with different commercially available dielectric materials. The results obtained from both the analysis are found to be in close approximation to the simulated results of reflectarray designs.
منابع مشابه
Equivalent Electrical Circuit Modeling of Ceramic-Based Microbial Fuel Cells Using the Electrochemical Impedance Spectroscopy (EIS) Analysis
The effect of the thickness of ceramic membrane on the productivity of microbial fuel cells (MFCs) was investigated with respect to the electricity generation and domestic wastewater treatment efficiencies. The thickest ceramic membrane (9 mm) gained the highest coulombic efficiency (27.58±4.2 %), voltage (681.15±33.1 mV), and current and power densities (447.11±21.37 mA/m2, 63.82±10.42 mW/m2) ...
متن کاملA Comparison Between Electrical Circuit and Finite Element Modeling Methods for Performance Analysis of a Three-Phase Induction Motor under Voltage Unbalance
Induction motor is the most popular load in the industry, it is very important to study about the effects of voltage quality on induction motor performance. One of the most important voltage quality problems in power system is voltage unbalance. This paper evaluates and compares two methods including finite element method (FEM) and equivalent electrical circuit simulation for investigation ...
متن کاملReflectivity of Reflectarrays Based on Dielectric Substrates
Problem statement: Reflectarrays provide a low cost and low profile solution for antennas required for high gain applications but their use is restricted in some applications due to the narrow bandwidth and high loss performance. These performance limitations can be attributed to different sources of reflectivity of the reflectarrays. This work provides a thorough investigation on the reflectiv...
متن کاملNumerical Modeling of a Nanostructure Gas Sensor Based on Plasmonic Effect
In the present paper, a nanostructure plasmonic gas sensor based on ringresonator structure at the wavelength range of 0.6-0.9 μm is presented. The plasmonicmaterials/SiO2 with the advantage of high mobility and low loss is utilized as a substratefor structure to obtain some appropriate characteristics for the sensing Performanceparameters. To evaluate the proposed senso...
متن کاملStudy the Effect of Silicon Nanowire Length on Characteristics of Silicon Nanowire Based Solar Cells by Using Impedance Spectroscopy
Silicon nanowire (SiNW) arrays were produced by electroless method on polycrystalline Si substrate, in HF/ AgNO3 solution. Although the monocrystalline silicon wafer is commonly utilized as a perfect substrate, polycrystalline silicon as a low cost substrate was used in this work for photovoltaic applications. In order to study the influence of etching time (which affects the SiNWs length) on d...
متن کامل