Effects of aluminum incorporation on hafnium oxide film using plasma immersion ion implantation
نویسندگان
چکیده
The effects of aluminum implantation on HfO2 thin films using plasma immersion ion implantation (Al– PIII samples) are investigated. X-ray photoelectron spectroscopy measurements reveal that most of the implanted aluminum atoms accumulated near the surface region of the oxide film. The greatly reduced leakage current, smaller flatband shift and steep transition from the accumulation to the depletion region in the capacitance–voltage characteristics for Al–PIII samples indicate that both bulk oxide and interface traps are significantly reduced by aluminum incorporation. Even though the aluminum concentration at the Si/HfO2 interface is very low the results indicate that trace amount of aluminum at the interface leads to significant improvements in both material and electrical characteristics of the thin HfO2 films. 2008 Elsevier Ltd. All rights reserved.
منابع مشابه
Silicon Heterojunction Solar Cells Using AlOx and Plasma-Immersion Ion Implantation
Aluminum oxide (AlOx) and plasma immersion ion implantation (PIII) were studied in relation to passivated silicon heterojunction solar cells. When aluminum oxide (AlOx) was deposited on the surface of a wafer; the electric field near the surface of wafer was enhanced; and the mobility of the carrier was improved; thus reducing carrier traps associated with dangling bonds. Using PIII enabled imp...
متن کاملImprovements of Ultra-High Molecular Weight Polyethylene Mechanical Properties by Nitrogen Plasma Immersion Ion Implantation
Nitrogen Plasma Immersion Ion Implantation (PIII) has been used to modify the surface chemical structure of Ultra High Molecular Weight Polyethylene (UHMWPE). Grinding and polishing processes based on abrasive papers and alumina pastes have been evaluated with regard to their results on the improvement of polymer surface roughness, which has shown to be of crucial importance for hardness charac...
متن کاملEvaporated HfO2/SiO2 Optical Coatings and Modifications for High-Power Laser Applications
Evaporated optical coatings fabricated from hafnium dioxide and silicon dioxide are the standard approach for high-peak-power laser components due to the high laser damage resistance of such coatings and the ability to deposit on largeaperture substrates. The tensile film stresses of such coatings may lead to failure, however, particularly in low-relative-humidity purged or vacuum use environme...
متن کاملFrom Plasma Immersion Ion Implantation to Deposition: A Historical Perspective on Principles and Trends
From Plasma Immersion Ion Implantation to Deposition: A Historical Perspective on Principles and Trends André Anders Lawrence Berkeley National Laboratory, University of California, Berkeley, California 94720, USA Abstract Plasma immersion techniques of surface modification are known under a myriad of names. The family of techniques reaches from pure plasma ion implantation, to ion implantation...
متن کاملEvolution mechanism of nanocrystalline tungsten-carbon and effects on tungsten implanted amorphous hydrogenated carbon
Tungsten doped amorphous carbon films are prepared on silicon 100 by postimplantation of tungsten ions into pure amorphous hydrogenated carbon using the plasma immersion ion implantation technique. The peak concentration of tungsten reaches 27 at. % and W–C nanocrystallites with largest diameters of 5 nm are formed in the near surface region. Both the quantity and size of these nanocrystallites...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Microelectronics Reliability
دوره 48 شماره
صفحات -
تاریخ انتشار 2008