Spontaneous Mixed-Mode Fracture in Bonded Similar and Dissimilar Materials

نویسنده

  • K. Xia
چکیده

In this paper, we report on an experimental study of spontaneous, mixed-mode, crack propagation in weakly bonded similar and dissimilar materials. A unique experimental configuration is proposed to induce spontaneous crack growth events along the interfaces. The cracks nucleate from tiny circular holes and are triggered by an exploding wire. They subsequently propagate under the action of a constant, farfield load. Dynamic photoelasticity in conjunction with high speed photography is used to capture the realtime isochromatics associated with crack propagation. In the case of identical materials, crack propagation is anti-symmetric with respect to the crack nucleation point while strong asymmetry is observed for the case of dissimilar materials. In both cases, cracks propagate at constant velocity from the initiation point. The time histories of dynamic stress intensity factors and of energy release rates of the propagating cracks along the bonded similar materials are also reported.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The mixed mode fracture mechanics in a hole plate bonded with two dissimilar plane

In the present research, the mixed-mode fracture mechanics analysis in a plate with central hole under tensile loading is considered. It is assumed that a plate containing two symmetrical hole-edge cracks is bonded with two dissimilar planes. The stress intensity factors at the crack tips are calculated. The problem is modeled in Casca software and this model is analyzed with Franc software. Th...

متن کامل

Mixed Mode Fracture Analysis of Multiple Interface Cracks

This paper contains a theoretical formulation of multiple interface cracks in two bonded dissimilar half planes subjected to in-plane traction. The distributed dislocation technique is used to construct integral equations for a dissimilar mediums weakened by several interface cracks. These equations are of Cauchy singular type at the location of dislocation, which are solved numerically to obta...

متن کامل

Mixed-mode I/II Interlaminar Fracture of CF/PEI Composite Material

Failures in composite materials occur mainly due to interlaminar fracture, also called delamination, between laminates. This indicates that characterizing interlaminar fracture toughness is the most effective factor in the fracture of composite materials. This study reports investigation on mixed-mode interlaminar fracture behaviour in woven carbon fibre/polyetherimide (CF/PEI) thermoplastic co...

متن کامل

Mixed Mode Crack Propagation of Zirconia/Nickel Functionally Graded Materials

Zirconia-nickel functionally graded materials were obtained by powder metallurgy technique. The microstructure, residual stress, fracture toughness and Vickers hardness were investigated. Mixed-mode fracture response of YSZ /Ni functionally graded materials was examined utilizing the three point bending test and finite element method (Cosmos/M 2.7). The results show that the stress intensity fac...

متن کامل

Evaluation of dissimilar joint properties of AISI316 to AISI430 stainless steels produced by GTAW

In this research, microstructure and mechanical properties of AISI316 to AISI430 dissimilar joint were investigated. For this purpose, GTAW process using ER316L and ER2209 filler metals with diameter of 2.4 mm was used. The microstructure and fracture surface of the welded samples were characterized by optical microscopy and scanning electron microscopy. Also the mechanical properties of the we...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006