On Poisson’s Ratio in Linearly Viscoelastic Solids
نویسندگان
چکیده
Poisson’s ratio in viscoelastic solids is in general a time dependent (in the time domain) or a complex frequency dependent quantity (in the frequency domain). We show that the viscoelastic Poisson’s ratio has a different time dependence depending on the test modality chosen; interrelations are developed between Poisson’s ratios in creep and relaxation. The difference, for a moderate degree of viscoelasticity, is minor. Correspondence principles are derived for the Poisson’s ratio in transient and dynamic contexts. The viscoelastic Poisson’s ratio need not increase with time, and it need not be monotonic with time. Examples are given of material microstructures which give rise to designed time dependent Poisson’s ratios. Mathematics Subject Classifications (2000) P21018 · C32070 · T15001
منابع مشابه
Wave Propagation in Sandwich Panel with Auxetic Core
Auxetic cellular solids in the forms of honeycombs and foams have great potential in a diverse range of applications, including as core material in curved sandwich panel composite components, radome applications, directional pass band filters, adaptive and deployable structures, filters and sieves, seat cushion material, energy absorption components, viscoelastic damping materials and fastening...
متن کاملFrequency Dependence of Poisson’s Ratio of Viscoelastic Elastomer Foam
All polymer foams are viscoelastic; for foams used in earplugs, this response is essential to their function. Poisson’s ratio was inferred from viscoelastic response of earplug foam in torsion and bending. Poisson’s ratio increases with frequency as a result of stress induced air flow. Air within the pores contributes to the overall bulk modulus at high frequency, but not at low frequency at wh...
متن کاملComposites with Inclusions of Negative Bulk Modulus: Extreme Damping and Negative Poisson’s Ratio
The effect of a negative bulk modulus phase in elastic composites is studied. Negative bulk modulus K<0 is shown to be possible in selected unit cells. In isotropic solids, K<0 can be attained when negative Poisson’s ratio is sufficiently small, below the stability limit (for stress control) 1⁄4 1. Such materials, if used as inclusions, are predicted to be stable with respect to the band format...
متن کاملNegative Poisson's ratio in 2D Voronoi cellular solids by biaxial compression: a numerical study
A 2D (two dimensional) random cellular solid model was built using FEM(finite element method) based on a modified Voronoi tessellation technique. A sequence of permanent biaxial compression deformations was applied on the model to obtain a series of re-entrant random cellular solid structures with different area compression ratios. The Poisson's ratio and energy absorption capacity of cellular ...
متن کاملNon-linear analyses of strain in flip chip packages improved by the measurement using the digital image correlation method
Numerical methods like the finite element (FE) method are often used to evaluate the reliability of electronic packages. However, the accuracy of non-linear numerical analyses should be confirmed by experimental measurements. In this study, we evaluated the strain distribution in flip chip (FC) packages with multi-layered printed circuit boards (PCBs) by combining the digital image correlation ...
متن کامل