Mechanical Design of Viscoelastic Parts Fabricated Using Additive Manufacturing Technologies
نویسنده
چکیده
Mechanical design of viscoelastic parts fabricated using additive manufacturing technologies are under consideration. Such a design is of great importance for obtaining final products with desired shape and strength which are determined by their stress-strain state. Mathematical model of model of viscoelastic solid which grows due to the process of additive manufacturing is proposed. Complete system of boundary value problem equations is obtained. A method for solving formulated boundary value problem is developed. Qualitative conclusions concerning the behavior of growing solids are presented.
منابع مشابه
Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing
Additive Manufacturing describes the technologies that can produce a physical model out of a computer model with a layer-by-layer production process. Additive Manufacturing technologies, as compared to traditional manufacturing methods, have the high capability of manufacturing the complex components using minimum energy and minimum consumption. These technologies have brought about the possibi...
متن کاملDesign and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملDesign and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملAdditive Manufacturing – IDH Perspective
Additive Manufacturing (AM) technologies build near-net shape components one layer at a time using data from 3D CAD models. AM technologies are the result of evolution of work in 3D printing and stereolithography (the STL files used to convert 3D CAD to layers for building parts come from stereolithography terminology) and could revolutionize many sectors of U.S. manufacturing by reducing compo...
متن کاملMICROSTRUCTURE, HARDNESS AND SURFACE ROUGHNESS CHARACTERIZATION OF EBM FABRICATED Ti-6Al-4V SAMPLES
Electron beam melting (EBM) is among the modern additive manufacturing processes whereby metal powders are selectively melted to produce very complicated components with superior mechanical properties. In this study, microstructure, hardness, and surface roughness of EBM fabricated Ti6Al4V samples were characterized. The results showed that the microstructure consisted of epitaxially-grown prim...
متن کامل