In-syringe dispersive solid phase extraction: a novel format for electrospun fiber based microextraction.
نویسندگان
چکیده
A novel in-syringe dispersive solid phase extraction (dSPE) system using electrospun silica fibers as adsorbents has been developed in the current work. A few milligrams of electrospun silica fibers were incubated in sample solution in the barrel of a syringe for microextraction assisted by vortex. Due to the benefit of dispersion and the high mass transfer rate of the sub-microscale electrospun silica fibers, the extraction equilibrium was achieved in a very short time (less than 1 min). Moreover, thanks to the long fibrous properties of electrospun fibers, the separation of the adsorbent from sample solution was easily achieved by pushing out the sample solution which therefore simplified the sample pretreatment procedure. Besides, the analytical throughput was largely increased by using a multi-syringe plate to perform the extraction experiment. The performance of the in-syringe dSPE device was evaluated by extraction of endogenous cytokinins from plant tissue samples based on the hydrophilic interaction. Six endogenous cytokinins in 20 mg of Oryza sativa L. (O. sativa) leaves were successfully determined under optimized conditions using in-syringe dSPE combined with liquid chromatography-mass spectrometry analysis. The results demonstrated that the in-syringe dSPE method was a rapid and high-throughput strategy for the extraction of target compounds, which has great potential in microscale sample pretreatment using electrospun fibers.
منابع مشابه
Preconcentration and Determination of Trace Amounts of Aromatic Compounds in Non-alcoholic Beer Samples by In-syringe Dispersive liquid–liquid Microextraction
In this paper, a new simple and effective method based on dispersive liquid–liquid microextraction procedure is proposed for rapid and simultaneous separation and preconcentration of ultra trace amounts of benzene, toluene, ethyl benzene and xylenes (BTEX) in non-alcoholic Beer samples. In this experiment, a glass syringe was used as extraction unit. With this simple configuration, the centrifu...
متن کاملHCl- Etched Steel Fiber for Determination of Phthalates in Water Samples by Solid-Phase Microextraction
In the present work, a stainless steel wire was etched by hydrochloric acid during a chemical etching process. The obtained black layer on the surface of the fiber was used as sorbent for extraction of trace amount of phthalates in the aqueous samples by solid phase microextraction. New fiber efficiency was investigated using a home-made solid-phase microextraction (SPME) device and gas chr...
متن کاملOrdered nanoporous carbon (CMK-3) coated fiber for solid-phase microextraction of benzene and chlorobenzenes in water samples
Nanoporous carbons (CMK-3) were prepared and have been used as a fiber coating for headspace solid phase microextraction (HS-SPME). The prepared materials were characterized by Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and N2 adsorption/desorption isotherms. The efficiency of the fiber was evaluated using a gas chromatography (GC) system for the extraction of benzene (B) and c...
متن کاملDispersive liquid-liquid microextraction coupled with magnetic nanoparticles for extraction of zearalenone in wheat samples
A new, sensitive and fast dispersive liquid-liquid microextraction (DLLME) coupled with micro-solid phase extraction (μ-SPE) was developed for determination of zearalenone (ZEN) in wheat samples. The DLLME was performed using acetonitrile/water (80:20 v/v) as the disperser solvent and 1-octanol as the extracting solvent. The acetonitrile/water (80:20 v/v) solvent was also used to extract ZEN f...
متن کاملOrdered Nanoporous Carbon Based Solid-Phase Microextraction for the Analysis of Nitroaromatic Compounds in Aqueous Samples
In this paper, the possibility of using a new ordered nanoporous carbon as a new fiber in headspace solid phase microextraction (HS-SPME) to determine of mononitrotoluenes (MNTs) in waste water is demonstrated. The structural order and textural properties of the ordered nanoporous carbon were studied by X Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) images and nitrogen adsorpti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Analyst
دوره 139 23 شماره
صفحات -
تاریخ انتشار 2014