Roughness Analysis on Composite Materials (Microfilled, Nanofilled and Silorane) After Different Finishing and Polishing Procedures.
نویسندگان
چکیده
The finishing and polishing of composite materials affect the restoration lifespan. The market shows a variety of finishing and polishing procedures and the choice among them is conditioned by different factors such as the resulting surface roughness. In the present study, 156 samples were realized with three composite materials, -microfilled, nanofilled and silorane-, and treated with different finishing and polishing procedures. Profilometric analyses were carried out on the samples' surface, the measured roughness values were submitted to statistical analysis. A complete factorial plan was drawn up and two-way analysis of variance (ANOVA) was carried out to investigate whether the following factors affect the values of roughness: (i) material; (ii) polishing/finishing procedure. Tukey post-hoc test was also conducted to evaluate any statistically significant differences between the material/procedure combinations. The results show that the tested materials do not affect the resulting surface quality but roughness values depend on the finishing/polishing procedure adopted. The procedures that involve: (a) the finishing with medium Sof-Lex discs and (b) the finishing with two tungsten carbide multi-blade milling cutters Q series and UF series are those that allow the lowest values of roughness to be obtained.
منابع مشابه
Comparison of One-Step and Multistep Polishing Systems for the Surface Roughness of Resin Composites
Aim: This study analyzed the effect of different finishing and polishing systems on the surface roughness of a microfilled (Amaris), and a nanofilled resin composite (Clearfil Majesty Esthetic) using Scanning electron microscope (SEM) analysis and surface roughness tester. Materials and Methods: Thirty five specimens of each material were prepared in a plexiglass mold (10 mm in diameter and 2 m...
متن کاملA Comparative Analysis of Different Finishing and Polishing Devices on Nanofilled, Microfilled, and Hybrid Composite: A Scanning Electron Microscopy and Profilometric Study
The continuous development of esthetically acceptable adhesive restorative material has made a variety of tooth-colored materials available for clinical use. The advent of visible light polymerizing resin and the use of finer filler particles permit resin composites to be polished to higher degree. The effect of polishing systems on surface finish has been reported to be material-dependent, and...
متن کاملEffect of Finishing /Polishing Techniques and Time on Surface Roughness of Silorane and Methacrylate Based Restorative Materials
Aim: The study evaluated the efficiency of various finishing and polishing systems and the effect of finishing and polishing time by using various procedures on surface roughness and hardness of silorane based (FiltekP90) and methacrylate based (Z100) restorative materials. Method: The surface roughness and surface hardness were measured using a profilometer and Vickers hardness tester respecti...
متن کاملSurface Roughness, Microhardness, and Microleakage of a Silorane-Based Composite Resin after Immediate or Delayed Finishing/Polishing
Objective. This study evaluated the effect of immediate or delayed finishing/polishing using different systems on the surface roughness, hardness, and microleakage of a silorane-based composite. Material and Methods. Specimens were made with silorane-based composite (Filtek P90, 3M ESPE) and assigned to the treatments: control (light-cured); aluminum oxide discs (Sof-Lex, 3M ESPE); diamond-impr...
متن کاملSurface roughness of one nanofill and one silorane composite after polishing.
The aim of this study was to compare the roughness of the surface of one nanofill (Filtek Supreme XT 3M Espe, St. Paul, USA) and one silorane (Filtek Silorane, 3M Espe, St. Paul, USA) composite after polishing. Five specimens of each composite were polymerized under a polyester strip for 40 seconds. After curing four probes were polished with different Sof-Lex discs and one probe with Pogo for ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The open dentistry journal
دوره 9 شماره
صفحات -
تاریخ انتشار 2015