Online Investigation of Optical Properties and Craze Propagation of Drawn Polypropylene Fiber by Using Interferometric Image Analysis
نویسندگان
چکیده
Pluta polarizing interference microscope was used to follow the crazing that occur on the surface of stretched polypropylene fibres at different drawing conditions. The samples were stretched until crazing initiated, and then craze propagation was monitored as a function of drawing speed and test temperature. The effect of craze dimension on their propagation velocity was taken into account. Three-dimensional birefringence profile for crazed polypropylene fibre has been demonstrated to investigate the birefringence of crazed fibre at different test times for fixed drawing speed value. Also the mean birefringence values of crazed polypropylene fibres were calculated and the results showed that, these values increased with the areal craze density. Video images were used to calculate the craze velocity. Optical micrographs and microinterferograms were presented for demonstrations.
منابع مشابه
Polypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties
Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...
متن کاملAn Investigation into the Deep Drawing of Fiber-Metal Laminates based on Glass Fiber Reinforced Polypropylene
Abstract Fiber-metal laminates (FMLs) are new type of composite materials which could improve defects of traditional composites in ductility, formability, impact and damage tolerance. Drawing behavior of a thermoplastic based FML was investigated consisting of glass-fiber reinforced polypropylene composite laminate and aluminum AA1200-O as the core and skin layers, respectively. The effects o...
متن کاملPolypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties
Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...
متن کاملIntroducing of the propagation criterion and investigation of that for near vacuum chamber pressures for multi hole gasoline direct injector spray
with developing of optical technologies, using of different imaging methods to study various properties of gasoline direct injection spray is under development. Scope of this article is to study the effect of overall spray angle and spray projected area for determination of spray propagation and investigate the effectiveness of this criterion. The injector was a multi-hole direct injection in...
متن کاملEffects of Glass-Fiber Reinforced Polymer and Waste Polypropylene Plastic Particles on Geotechnical Properties of Clayey Soils for Using Subgrade in the Pavement
The fine-grained soil including the problematic ones can cause many difficulties in project accomplishment. Settlement and swelling are among the problems of the fine-grained soils. The present study compared the effects of the polypropylene waste plastic (PWP) and glass fiber reinforced polymer (GFRP) on geotechnical properties of the clayey soils for the subgrade design. To this end, the PWP ...
متن کامل