Fragmentation instabilities of a drop as it falls in a miscible fluid
نویسنده
چکیده
We review here a series of experiments on the fragmentation instabilities that a liquid drop undergoes as it falls inside a fluid with which it is miscible, so called the solvent. Motivated by the original experiments initiated by Thomson and Newall in 1885, we started to investigate this subject more than one decade ago, encountering up to date a number of challenging problems in hydrodynamical instabilities, complicated by the presence of transient interfaces between the drop and the solvent. In particular, we have shown that when a drop of liquid is deposited over the surface of the same liquid, it falls down inside the solvent because the energy associated to its surface tension against air is instantaneously converted into kinetic energy. As a consequence, a very fast fluid injection takes place as the drop touches the free surface of the solvent and the drop enters inside the solvent. Due to the hydrodynamical instabilities related to the large velocity gradients, it develops into a ring that expands radially. The ring continues to go downwards inside the solvent until it stops at a certain height due to viscous dissipation. In the first stages of the ring expansion, a fluid membrane remains attached to the ring, so-called “turban” for its shape, which is concave or convex depending on the sign of the density difference between the drop and the solvent. When a small density difference is introduced between the drop and the solvent, the ring becomes unstable because of density gradients and it fragments into smaller droplets. On their turn, the secondary droplets may undergo the same instability and may fragment again, so that a cascade of fragmentation takes place. If the density difference is positive, that is, the drop is heavier than the solvent, the secondary droplets continue to go down deeper inside the solvent, until the whole process is washed out by the slow diffusion of the concentration gradients. When the density difference between the drop and the solvent is negative, then the secondary droplets rise up to the free surface of the solvent, where they are distorted by the equivalent of an impact with a rigid wall. Universal scaling laws for the cascade of fragmentation and for the dynamical behavior of the drop have been derived and accompany the experimental observations.
منابع مشابه
Fragmentation instability of a liquid drop falling inside a heavier miscible fluid.
We report a different type of drop instability, where the density difference between the drop and the solvent is negative. We show that the drop falls inside the solvent down to a minimum height, then fragmentation takes place and secondary droplets rise up to the surface. We have developed a theoretical model that captures the essentials of the phenomenon and predicts the correct scalings for ...
متن کاملFragment Formation in the Break-up of a Drop Falling in a Miscible Liquid
When falling in a lighter miscible solvent, a drop of liquid deforms to a torus which then breaks up into several fragments or just disappears by diffusion. By using liquids of different compositions we show the universal behaviour of the phenomenon, and its dependence on two nondimensional numbers, the fragmentation number F , and the Schmidt number S. While F marks the transition from diffusi...
متن کاملSurface tension effects in the zero gravity inflow of a drop into a fluid
As a drop of fluid is deposited on the surface of a miscible fluid (that we call the solvent), it undergoes a strong pulling due to its surface rupture and it acquires a kinetic energy independently of gravity. For the drop and the solvent being of the same fluid we observe a drop injection at an initial velocity which scales as the square root of the surface tension of the drop against air. On...
متن کاملCARBON DIOXIDE MINIMUM MISCIBILITY PRESSURE ESTIMATION (CASE STUDY)
Carbon dioxide flooding is considered to be one of the most effective enhanced oil recovery methods for the light oil reservoirs. Depending on the operating pressure, the process might be miscible or immiscible. Minimum miscibility pressure (MMP) is the most important parameter for assessing the applicability of any miscible gas flood for an oil reservoir. The miscibility condition is determine...
متن کاملAn Investigation of Optimum Miscible Gas Flooding Scenario: A Case Study of an Iranian Carbonates Formation
Gas injection into carbonate formations is one of the most important activities to protect oil reserves that can guarantee a steady production. On-time injection of enough gas can result in the recovery of billions barrels of oil. In addition, it can preserve a huge amount of gas for the next generations. If the reservoir depth is shallow, or the reservoir fluid has a little amount of intermedi...
متن کامل