Modeling of input-output Relationships for electron beam butt welding of dissimilar materials using Neural Networks
نویسندگان
چکیده
Electron beam butt welding of stainless steel (SS 304) and electrolytically tough pitched (ETP) copper plates was carried out according to central composite design of experiments. Three input parameters, namely accelerating voltage, beam current and weld speed were considered in the butt welding experiments of dissimilar metals. The weld-bead parameters, such as bead width and depth of penetration, and weld strength in terms of yield strength and ultimate tensile
منابع مشابه
Study on electron beam butt welding of austenitic stainless steel 304 plates and its input–output modelling using neural networks
Butt welding of austenitic stainless steel 304 plates was carried out using an electron beam. Experiments were conducted for various combinations of input process parameters determined according to central composite design. Three input parameters, namely accelerating voltage, beam current, and welding speed were considered during the experiments. The weld-bead parameters, namely bead width and ...
متن کاملOptimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys
Electron beam welding has shown a remarkable job in the space industry for welding of components. It is performed under a vacuum environment that eliminates foreign matter such as hydrogen, oxygen, and other gases. Joining of similar and dissimilar materials is the main advantage of electron beam welding with high depth to width ratio as well as sharp focus at the point where parts are to be we...
متن کاملThe effect of electron beam welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy
This study aimed to investigate the effect of electron beam welding parameters on the microstructural characteristics and mechanical properties of the dissimilar joint between 17-4PH precipitation hardening stainless steel and Ti6Al4V alloy. For this purpose, the welding of these two alloys was done without an interlayer and with an interlayer of copper with a thickness of 0.8 mm. Two different...
متن کاملThe effect of electron beam welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy
This study aimed to investigate the effect of electron beam welding parameters on the microstructural characteristics and mechanical properties of the dissimilar joint between 17-4PH precipitation hardening stainless steel and Ti6Al4V alloy. For this purpose, the welding of these two alloys was done without an interlayer and with an interlayer of copper with a thickness of 0.8 mm. Two different...
متن کاملIntelligent Methodology for Sensing, Modeling and Control of Pulsed GTAW Part 2 Butt Joint Welding Double variable intelligent control incorporated with a fuzzy neural network and expert system is proposed for bead shape control during butt joint welding
This paper addresses intelligent techniques for the quality control of the pulsed gas tungsten arc welding process for butt joints, and it is a development to Ref. 1. Because there exist some important differences in butt joint welding and bead-on-plate welding, the modeling and control scheme in Ref. 1 does not completely fit for butt joint welding. In this paper, the differences between the t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- International Journal of Computational Intelligence and Applications
دوره 13 شماره
صفحات -
تاریخ انتشار 2014