6-Port GaN HEMT Models Help Designers Optimize PA Efficiency
ثبت نشده
چکیده
This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Cree’s products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected] By choosing to view this document, you agree to all provisions of the copyright laws protecting it. 6-Port GaN HEMT Models Help Designers Optimize PA Efficiency
منابع مشابه
GaN HEMT PA with over 84% power added efficiency
Described are the design procedure and measured performance of a PA targeted for the W-CDMA downlink band exhibiting over 84% PAE at 2.14 GHz. The PA is designed with an uncharacterised GaN HEMT. A measurement-based design approach is used to optimise the source and load impedance at the fundamental frequency with classF harmonic terminations enforced. S-parameters extracted from a full-wave EM...
متن کاملDesign of class E power amplifiers by using scalable electro-thermal GaN HEMT model
In this paper, a scalable large signal GaN HEMT model including nonlinear thermal sub-circuit is described. Only two scalable parameters are needed in the Ids scalable model by introducing a simple correction factor. The established model can predict the I–V curves at different-in-size AlGaN/GaN HEMTs devices accurately. Small signal S-parameters and large signal load pull tests with on-wafer m...
متن کاملHighly efficient 2.7-2.9GHz class-F and inverse class-F power amplifiers in GaN HEMT technology
In this letter, novel class-F and inverse class-F power amplifier (PA) topologies were proposed, simulated, realized and measured for 2.7–2.9GHz frequency band by using Gallium Nitride high electron mobility transistor (GaN HEMT). Realizations are made on Rogers TMM3 dielectric material which has 0.381mm thickness and 3.27 dielectric constant. Proposed class-F and inverse class-F PAs have 10W (...
متن کامل3.5-3.8GHz class-E balanced GaN HEMT power amplifier with 20W Pout and 80% PAE
In this study, balanced and single ended class-E power amplifiers (PAs) were designed and realized for 3.5–3.8GHz band by using Gallium Nitride high electron mobility transistor (GaN HEMT). Realizations were made on low loss Rogers RT5880 dielectric material which has 0.254mm thickness and 2.2 dielectric constant. Proposed balanced class-E PA has approximately 20W (43 dBm) output power with 80%...
متن کاملMMIC class-F power amplifiers using field-plated GaN HEMTs
Abstract: Class-F microwave monolithic integrated circuit (MMIC) power amplifiers (PA) fabricated in a GaN technology are reported. Field-plated GaN HEMT devices are used for highpower performance. Two MMICs are reported. The first class-F MMIC PA operating at 2.0GHz achieved a power-added efficiency (PAE) of 50% with 38dBm output power and 6.2W/mm power density. A second class-F PA operating a...
متن کامل