Impact of Ni(II), Zn(II) and Cd(II) on biogassification of potato waste.
نویسندگان
چکیده
A study was conducted on anaerobic digestion of potato waste and cattle manure mixture, inoculated with 12% inoculum and diluted to 1:1 substrate water ratio at 37 +/- 1 degrees C. Initially pH of substrate was found to be 4.5 to 5.0. Lime and sodium bicarbonate solutions were employed to adjust the pH to 7.5. Biogas production continued up to 10 and 7 days, when lime and sodium bicarbonate solutions were used to adjust the pH, respectively. Biogassification potential was studied in response to different ratio of waste and cattle manure. Biogas production rate was higher when potato waste and cattle manure were used in 50:50 ratio. Effect of two different concentrations (2.5 and 5.0 ppm) of three heavy metals viz. (Ni (II), Zn (II) and Cd (II)) on anaerobic digestion of substrate (potato waste--cattle manure, 50:50) was studied. At 2.5 ppm, all the three heavy metals increased biogas production rate over the control value. The percentage increase in biogas production over the control was highest by Cd, followed by Ni and Zn. In all the treatments, methane content of biogas increased with increase in time after feeding. Various physico-chemical parameters viz. total solids, total volatile solids, total organic carbon and chemical oxygen demand considerably declined after 7 days of digestion and decline was greater in presence of heavy metals as compared to control. The physico-chemical parameters revealed maximum decrease in the presence of 2.5-ppm concentrations of heavy metals with the substrate. Among all the three heavy metals employed in the study, Cd++ at 2.5 ppm was found to produce maximum biogas production rate. The use of three heavy metals to enhance biogas production from potato and other horticultural waste is discussed.
منابع مشابه
Assessment of drain water receiving effluent from tanneries and its impact on soil and plants with particular emphasis on bioaccumulation of heavy metals.
In the present study, impact of tannery and other industrial effluents on the physico-chemical characteristics of loamy drain water and their consequent impact on soil and plants irrigated with effluent have been studied. The study reveals most of the parameter pH, BOD5 and COD at sampling station I was higher than station II. Waste water quality at both Stations I and II exceeded prescribed li...
متن کاملSelective Sorption of Heavy Metal Ions from Aqueous Solutions Using m-Cresol Based Chelating Resin and Its Analytical Applications
Salicylic acid-Formaldehyde-m-Cresol (SFM) terpolymer had been synthesized in DMF media by conventional method. The resulting resin had been characterized by FTIR spectra, elemental and thermogravimetric analyses. The morphology of SFM resin had been studied by SEM and Optical photograph. Various parameters like rate of equilibration, effect of pH on ion exchange capacity and effect of conc...
متن کاملSorption of Cu(II), Zn(II) and Ni(II) from aqueous solution using activated carbon prepared from olive stone waste
The performance of olive stone activated carbon (OSAC) for sorption of Cu2+, Zn2+ and Ni2+ ions was investigated via batch technique. OSAC materials were prepared under different physially activation conditions. Olive stone waste was physically activated with N2 gas and steam gas at 900oC at 3.5h hold time (OSAC-3) was choice as the best one for Cu2+, Zn2+ and Ni2+ removal. Characterization for...
متن کاملSynthesis, characterization, antibacterial activity and molecular modeling studies of Ni(II) and Zn(II) complexes with phenylpyridylformamidine ligand
The Ni(II) and Zn(II) complexes with phenylpyridylformamidine (PhPyF) ligand, [Ni(PhPyF)Cl2] and [Zn(PhPyF)Cl2], have been prepared and investigated using different chemical techniques such as elemental analysis, molar conductance, FT-IR, UV-vis spectra and magnetic moment. The obtained chemical analysis data showed the formation of 1:1 (metal: ligand) ratio. The square planar and tetrahedral g...
متن کاملSimultaneous Adsorptive Stripping Differential Pulse Voltammetric Measurements of Trace Lead, Cadmium and Nickel in the Presence of 2-aminobenzoic Acid
In this study, 2-aminobenzoic acid (ABA) has been used as complexing ligand for simultaneousdetermination of metal ions by adsorptive cathodic stripping voltammetry (AdCSV), for the firsttime. Thus, a selective and sensitive procedure was presented for simultaneous determination oflead, cadmium and nickel using ABA and differential pulse-adsorptive cathodic strippingvolt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of environmental biology
دوره 27 1 شماره
صفحات -
تاریخ انتشار 2006