Catalytic CO2-to-CO conversion in water by covalently functionalized carbon nanotubes with a molecular iron catalyst.
نویسندگان
چکیده
The covalent grafting of an Fe porphyrin on carbon nanotubes led to efficient electroreduction of CO2 into CO in water (pH 7.3). CO was obtained with high selectivity and turnover at 0.5 V overpotential. The grafting strategy may be further extended to various conductive and semi-conductive surfaces.
منابع مشابه
Effect of MgAl2O4 catalyst support synthesis method on the catalytic activity of nickel Nano catalyst in reverse water gas shift reaction
In this research effect of synthesis method of magnesium aluminate as support of Ni catalysts at the reverse water gas shift (RWGS) reaction was evaluated. The RWGS reaction is applied in Carbon Dioxide Hydrogenation to Form Methanol via a Reverse Water-Gas Shift Reaction (CAMERE) process for the transformation of CO2 into methanol. The MgAl2O4 supports were prepared by sol-gel (M1), surfactant...
متن کاملEffects of Confinement in Carbon Nanotubes on the Performance and Lifetime of Fischer-Tropsch Iron Nano Catalysts
The effects of confinement in carbon nanotubes on Fischer-Tropsch (FT) activity, selectivity and lifetime of Carbon NanoTubes (CNTs) supported iron catalysts are reported. A method was developed to control the position of the catalytic sites on either inner or outer surface of carbon nanotubes. TEM analyses revealed that more than 80% of iron oxide particles can be controlled to be position...
متن کاملCatalytic Effect of Metal Species on Enhancement of CO2 Gasification Reactivity of Biomass Char
In the Boudouard reaction, where CO2 is reacted with carbon (char) to produce CO, very high temperatures are required to shift the equilibrium towards CO production. This endothermic reaction is inherently slow and catalytic species are effective to speed up the reaction rate at temperatures below 900 °C. In this study, the catalytic effect of some alkali (K, Na), alkaline earth (Ca) and transi...
متن کاملGrowth of CNTs over Fe–Co/Nanometric TiO2 Catalyst by CVD: The Effects of Catalyst Composition and Growth Temperature
In this research carbon nanotubes were produced by chemical vapor deposition of acetylene over a mixture of iron and cobalt catalysts supported on nanometric TiO2 and the influences of two synthesis parameters: growth temperature and catalyst composition ratio on properties of end-product carbon nanotubes were investigated. The catalytic basis was prepared by wet impregnation ...
متن کاملCharacterization and Catalytic Behaviour of Nanostructured Iron Oxide Powder from Waste Pickle Liquor of Steel Industry
Nanostructured iron oxide powder that has been recovered from waste pickling liquor unit of steel industry was studied for oxidation catalytic applications. In this research, the powder was characterized by X-ray diffraction (XRD) and transition electron microscopy (TEM) for determination of phase structure, morphology and particle size. Furthermore, the specific surface area of the powder was ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 52 81 شماره
صفحات -
تاریخ انتشار 2016