Optics of coated paperboard, kappa, Erik Bohlin

Analysis of Acoustic Emission on White-Coated Paperboard During a Wedge Cutting Process

Modified Physical Optics Approximation for RCS Calculation of Electrically Large Objects with Coated Dielectric

The Radar Cross Section of a target plays an important role in the detection of targets by radars‎. ‎This paper presents a new method to predict the bistatic and monostatic RCS of coated electrically large objects. ‎The bodies can be covered by lossy electric and/or magnetic Radar Absorbing Materials (RAMs)‎. ‎These materials can be approximated by the Fresnel reflection coefficients‎. ‎The pro...

Planar fluidic channels on TiO2 nanoparticle coated paperboard

A new design for permanent, low-cost, and planar fluidic channels on TiO2 nanoparticle coated paperboard is demonstrated. Initially superhydrophobic TiO2 nanoparticle coatings can be converted to hydrophilic by ultraviolet (UVA) light, and fluidic channels can be generated. A simple water treatment after the UVA illumination converts the channels permanent when nanoparticles are removed from th...

UV-Curable Coating Process on CMYK-Printed Duplex Paperboard, Part II: Effects of Nano-TiO2 Modification

The influence of TiO2 nano-particles (nano-TiO2) was studied relative to the mechanical and optical properties of CMYK printed paperboard after coating with a UV-curable varnish. Commercial duplex paperboard (glazed grayback paperboard, 230 g/m) was printed with a CMYK offset printing process. Board samples were coated with a nano-TiO2 modified UV-curable varnish at four treatment levels (0, 0....

Business models and financial impacts of future mobile broadband networks

The usual disclaimer apply-this contribution is of the authors, and does not necessarily reflect the view of the European Commission.